Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115
Public Domain
-
2000/04/01
-
Series: NIOSH Numbered Publications
File Language:
English
Stout, N. A., Casini, V., & Kisner, S. (2000). Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health. https://stacks.cdc.gov/view/cdc/237036
Stout, Nancy A., Virgil Casini, and Suzanne Kisner. Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health, 2000. https://stacks.cdc.gov/view/cdc/237036.
Stout, Nancy A., et al. Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health, 2000, Stacks. https://stacks.cdc.gov/view/cdc/237036.
Details
-
Alternative Title:Worker Deaths by Electrocution: NIOSH 2000-115 CD-ROM
-
Personal Author:
-
Corporate Authors:
-
Description:This report provides the complete text of 224 electrocution investigative reports that were cited in the document 'Worker Deaths by Electrocution: A Summary of Surveillance Findings and Investigative Case Reports' (NIOSH Publication No. 98-131). Based on data from the NIOSH National Traumatic Occupational Fatalities (NTOF) surveillance system, electrocutions were the fifth leading cause of death from 1980 through 1992. The 5,348 deaths caused by electrocutions accounted for 7 percent of all fatalities and an average of 411 deaths per year. How can a worker be exposed or put at risk. Electricity is present at most jobsites, and many American workers, regardless of industry or occupation, are exposed to electrical energy daily during the performance of their tasks. These hazardous exposures may exist through contact with an object as seemingly innocuous as a broken light bulb to an energized overhead powerline. What recommendations has the federal government made to protect workers' health. The Occupational Safety and Health Administration (OSHA) addresses electrical safety in Subpart S 29 CFR 1910.302 through 1910.399 of the General Industry Safety and Health Standards. The standards contain requirements that apply to all electrical installations and utilization equipment, regardless of when they were designed or installed. Subpart K of 29 CFR 1926.402 through 1926.408 of the OSHA construction safety and health standards contain installation safety requirements for electrical equipment and installations used to provide electric power and light at the jobsite. These sections apply to both temporary and permanent installations used on the jobsite. Additionally, the National Electrical Code (NEC) and the National Electrical Safety Code (NESC) comprehensively address electrical safety regulations. NIOSH recommendations focusing on prevention are included in this Technical Document. ; This report was originally released on CD-ROM in April 2000, due to large file size and slower internet speeds.
-
Subjects:
-
Keywords:
-
Series:
-
Subseries:
-
Document Type:
-
Genre:
-
Place as Subject:
-
Rights:Public Domain
-
CIO:
-
Division:
-
Topic:
-
Location:
-
Pages in Document:702 pdf pages
-
Contributor:Wallis, David ; Broderick, Thomas A. ; Paul, Orville V. Jr. ; Reed, Laurence D. ; Pettit, Ted A. ; Pizatella, Timothy J. ; Linn, Herbert I. ; Pratt, Stephanie G. ; March, Suetta J. ; Dalton, Teresa L. ; Boyce, Kathy J. ; Spiker, Joyce R. ; Keane, Paul R. ; Hixon, Pamela S. ; Morton, Linda L.
-
NIOSHTIC Number:nn:20000405
-
NTIS Accession Number:PB2000500094
-
Citation:Morgantown, WV: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2000-115, 2000 Apr ; :CD-ROM
-
Federal Fiscal Year:2000
-
Peer Reviewed:False
-
Download URL:
-
File Type:
[PDF - 4.09 MB]
-
Collection(s):
-
Main Document Checksum:urn:sha-512:59a6d53bb03cbdf95e9b2f1b6e7ecd09aa6e44325fc42486486aa500b25f03d1cfae5e5ddcfdbd48050a90a5bac59fdd4656d7672e863a673849221dd789c1f0
Related Documents
-
A fatal accident circumstances and epidemiology (FACE) report on an electrocution in North Carolina was presented. The report was part of the NIOSH FA ...National Institute for Occupational Safety and Health
-
While disassembling an energized switch box in an office building on March 17, 1986, a 19 year old apprentice electrician contacted live conductors an ...National Institute for Occupational Safety and Health
-
While helping his supervisor install lights on a private dock, an electrician's apprentice made contact with an energized circuit and was electrocuted ...National Institute for Occupational Safety and Health
-
A 19 year old laborer was electrocuted while painting a concrete silo 65 feet high, 16 feet in diameter. The man was employed by a small concrete rest ...National Institute for Occupational Safety and Health
-
A case study of a warehouse worker electrocuted by a 440 Volt (V) trolley wire was examined. Three shipping and receiving personnel were assigned the ...National Institute for Occupational Safety and Health
-
A 20 year old bricklayer working on a scaffold was electrocuted when a section of wire reinforcement came in contact with a 7620 volt power line and t ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report on an electrocution in Kentucky was presented. The report was part of the NIOSH FACE pro ...National Institute for Occupational Safety and Health
-
A 21 year old groundman employed by a electrical line maintenance and construction company was electrocuted when an aerial bucket boom contacted a 720 ...National Institute for Occupational Safety and Health
-
A 21 year old male plastic extrusion machine operator was electrocuted after he reenergized the corona treater on his machine. The corona treatment, t ...National Institute for Occupational Safety and Health
-
A carpenter, aged 22 years, was electrocuted when a portable electrical saw he was using developed a ground fault at a construction site. The power to ...National Institute for Occupational Safety and Health
-
A 23 year old groundman employed by an electrical contracting corporation was electrocuted while helping to plumb and anchor a previously set utility ...National Institute for Occupational Safety and Health
-
A 23 year old lineman was electrocuted when he came into contact with a lightning arrestor conductor during work on a connection box on a utility pole ...National Institute for Occupational Safety and Health
-
A 24 year old mobile home installer was electrocuted while using an electric auger to place steel anchor rods under a new home. Four mobile home servi ...National Institute for Occupational Safety and Health
-
On July 23, 1985, a 24 year old textile worker was electrocuted when he came in contact with a loom and a feeder energized by a 550 volt 3 phase power ...National Institute for Occupational Safety and Health
-
The 25 year old manager of a small restaurant was electrocuted while cleaning the floor of the kitchen. During the process of washing the floor in a r ...National Institute for Occupational Safety and Health
-
An electrician's helper employed by an electrical contracting company was electrocuted while wiring a fluorescent light fixture in a suspended ceiling ...National Institute for Occupational Safety and Health
-
When a 27 year old painter moved an aluminum ladder he was using in order to paint a gutter on the outside of an apartment building, he made contact w ...National Institute for Occupational Safety and Health
-
A flashover explosion occurred in a 20 kilovolt switch compartment which caused the death of a 28 year old electronic technician on August 18, 1986. T ...National Institute for Occupational Safety and Health
-
A truck driver was unloading precast concrete manhole assemblies at a construction site when the boom of the crane mounted on the trailer contacted a ...National Institute for Occupational Safety and Health
-
A 29 year old maintenance man with 6 years of experience was electrocuted while trouble shooting an electrical problem with a popsicle wrapping machin ...National Institute for Occupational Safety and Health
-
A 29 year old class-A mechanic employed by a public electrical utility company was electrocuted while performing maintenance at a substation. The main ...National Institute for Occupational Safety and Health
-
A case study of an electrocuted welder was examined. A 29 year old employee of a steel treatment facility was attempting to turn off a welder when he ...National Institute for Occupational Safety and Health
-
An electrician was electrocuted while installing new wiring when he accidentally contacted an energized conductor. He was employed by an electrical co ...National Institute for Occupational Safety and Health
-
A 31 year old groundman was electrocuted while performing maintenance on electric service lines from an aerial bucket. A standby crew from the local m ...National Institute for Occupational Safety and Health
-
While attempting to replace a socket on an energized fluorescent light fixture, a journeyman electrician was electrocuted. The employee was part of a ...National Institute for Occupational Safety and Health
-
A 33 year old apprentice substation electrician in the final 6 months of a 6 year training program died after he came in contact with electrical energ ...National Institute for Occupational Safety and Health
-
A machine operator was electrocuted when he inadvertently contacted an energized conductor located in a motor control panel box that had the cover pla ...National Institute for Occupational Safety and Health
-
A maintenance worker was electrocuted while replacing a ballast in a fluorescent light fixture. The man had been employed at the company for 16 years ...National Institute for Occupational Safety and Health
-
A 34 year old superintendent of manufacturing at a facility which produced mulch fibers from wood chips was electrocuted while attempting to find an e ...National Institute for Occupational Safety and Health
-
A laborer standing on top of a house being moved down a street contacted a live 7200 volt power line and was electrocuted. The laborer and a coworker ...National Institute for Occupational Safety and Health
-
A 37 year old electrician was electrocuted while attempting to reenergize a primary line. Eight utility workers had repaired a 7200 volt alternating c ...National Institute for Occupational Safety and Health
-
A 37 year old scale technician was electrocuted while he and a crane operator were attempting to move an abandoned truck platform scale. The scale was ...National Institute for Occupational Safety and Health
-
While attempting to repair a power line, a 40 year old meter technician, working overtime as a lineman technician, was electrocuted when he contacted ...National Institute for Occupational Safety and Health
-
A 42 year old truck driver for a manufacturer of masonry products was electrocuted when a truck mounted crane he was operating contacted a 7600 volt p ...National Institute for Occupational Safety and Health
-
During the unloading of pallets of concrete blocks from a truck, a 41 year old truck driver was electrocuted. At the time of the accident, he was oper ...National Institute for Occupational Safety and Health
-
A 50 year old utility worker died 1 week after an accident in which he had received severe thermal burns when he came into contact with a 7200 volt li ...National Institute for Occupational Safety and Health
-
A 52 year old electrical technician, employed by a high voltage power transmission and distribution equipment company, was electrocuted while testing ...National Institute for Occupational Safety and Health
-
A 52 year old first class electrician was electrocuted while performing preventive maintenance on a 34.5 kilovolt oil circuit breaker (OCB). The victi ...National Institute for Occupational Safety and Health
-
A 54 year old electrician who was a partner in an electrical contracting company was electrocuted while installing a runway lighting system. The elect ...National Institute for Occupational Safety and Health
-
A pipe layer was guiding a load attached to the bucket of a backhoe when the backhoe contacted a 13,200 kilovolt overhead powerline. The job that day ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report describing an electrocution in North Carolina was presented. The report was part of the ...National Institute for Occupational Safety and Health
-
A groundman was electrocuted when an energized power line broke, contacting a pole trailer onto which the victim was loading a pole. The employer had ...National Institute for Occupational Safety and Health
-
A 23 year old male apprentice electrician was electrocuted while making a connection for a light fixture in a junction box. The employer was an electr ...National Institute for Occupational Safety and Health
-
A 20 year old male apprentice lineman died after making direct contact with a 7200 volt primary wire. The victim was working for a large, multistate u ...National Institute for Occupational Safety and Health
-
A 34-year-old male apprentice lineman engaged in setting a wooden utility pole was electrocuted. The victim was employed by an electrical contracting ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a 30 year old male apprentice lineman working as a member of a power line construction crew who was electrocuted while installing a new le ...National Institute for Occupational Safety and Health
-
The case of a 23 year old male apprentice lineman who was fatally injured when he contacted a 13.2 kilovolt line was examined. The man was employed by ...National Institute for Occupational Safety and Health
-
While removing grounds from a 230 kilovolt (kV) transmission circuit, a lineman trainee was electrocuted. The victim was employed by an electric utili ...National Institute for Occupational Safety and Health
-
A 21 year old male apprentice lineman was electrocuted when he contacted a 13,700 volt power line while upgrading a power distribution system. The vic ...National Institute for Occupational Safety and Health
-
A sheet metal apprentice was electrocuted while guiding a powered scaffold being unloaded from the flatbed of a truck, using the crane mounted on the ...National Institute for Occupational Safety and Health
-
The case of a male laborer on an asbestos removal crew who was electrocuted when he contacted an exposed overhead conductor in a utility tunnel was ex ...National Institute for Occupational Safety and Health
-
The case of a 17 year old female assistant pool manager who was electrocuted when she contacted an ungrounded electric motor was evaluated. The victim ...National Institute for Occupational Safety and Health
-
A case study of a fatality resulting from a metal ladder in contact with a 7,200 Volt (V) power line was examined. A 28 year old male billboard worker ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report of an electrocution in Tennessee was presented. The report was part of the NIOSH FACE pr ...National Institute for Occupational Safety and Health
-
An employee for a brick sales and delivery company was electrocuted when the boom on a truck mounted crane he was operating contacted a 7200 volt powe ...National Institute for Occupational Safety and Health
-
A 31 year old male carpenter was electrocuted when a 12 foot long strip of aluminum drip edging he was installing contacted a 7200 volt powerline loca ...National Institute for Occupational Safety and Health
-
The case of a 42 year old male cement finisher who was electrocuted when the metal handle of a cement finishing bull float he was using contacted a 13 ...National Institute for Occupational Safety and Health
-
A case study of an electrocution resulting from the installation of a traffic control pole was examined. A crew of four from a city traffic engineerin ...National Institute for Occupational Safety and Health
-
A 21 year old male concrete worker was electrocuted at a precast concrete manufacturing facility when he climbed a steel column, stepped onto a steam ...National Institute for Occupational Safety and Health
-
The case of a 19 year old construction laborer who was electrocuted upon handling a damaged extension cord was examined. The employer in this incident ...National Institute for Occupational Safety and Health
-
The case of a 37-year-old construction laborer who was electrocuted while pulling a wire rope load choker attached to a crane cable toward a load was ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The fatal accident circumstances and epidemiology report on an incident involving an electrocution is presented. The report is part of a NIOSH program ...National Institute for Occupational Safety and Health
-
A construction worker was electrocuted when the boom of a crane contacted a 13 kilovolt power line. He had been guiding a load attached to the crane w ...National Institute for Occupational Safety and Health
-
The case of an 18 year old construction worker who was electrocuted and two coworkers who received an electrical shock when the 32 foot aluminum exten ...National Institute for Occupational Safety and Health
-
A case study of a contract worker electrocuted while repairing a 13.2 kiloVolt (kV) power line was examined. A power company official instructed the c ...National Institute for Occupational Safety and Health
-
On August 28, 1985, a 25 year old county highway worker was electrocuted when the 20 foot steel handle of a modified post hole digger he was holding m ...National Institute for Occupational Safety and Health
-
A case study of a worker electrocuted by an electric arc from a power line was examined. The employer had contracted with a local utility company to r ...National Institute for Occupational Safety and Health
-
The case of a 27-year-old crew foreman who was electrocuted when he contacted an energized conductor on a utility pole was investigated. The employer ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 46-year-old male road maintenance foreman who was employed by the state department of transportation was electrocuted and another road maintenance w ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a 39 year old male deputy sheriff who was electrocuted while attempting to move a 7,200 volt power line that was down across a highway due ...National Institute for Occupational Safety and Health
-
A 37 year old male distribution line technician died from a secondary infection 37 days after receiving third degree burns when he contacted an energi ...National Institute for Occupational Safety and Health
-
A 44 year old male distribution line technician was electrocuted and a second distribution line technician received severe electrical burns when a new ...National Institute for Occupational Safety and Health
-
The case of a 46 year old distribution line technician who was killed while clearing branches from a single phase, 7200 volt primary powerline was exa ...National Institute for Occupational Safety and Health
-
A 49 year old driller was electrocuted when the boom of his drilling machine contacted a 34,500 volt overhead power line. The construction company for ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report on an electrocution in Ohio was presented. The report was part of the NIOSH FACE project ...National Institute for Occupational Safety and Health
-
A 35 year old serviceman was electrocuted while installing a guy wire to a pole. A conductor was being installed between two adjacent poles by a four ...National Institute for Occupational Safety and Health
-
The case of an electrical line mechanic who was electrocuted while trying to attach an energized conductor to a crossarm mounted insulator was describ ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 45 year old male electrical contractor foreman and a 30 year old male groundman were electrocuted when a guy wire they were touching contacted a 13, ...National Institute for Occupational Safety and Health
-
This report concerned the death of a 37 year old lineman who died of injuries sustained when he attempted to jump from a burning aerial bucket and fel ...National Institute for Occupational Safety and Health
-
The case of a 27 year old male electrical lineman who was electrocuted when he contacted an energized trailer mounted line tensioner was investigated. ...National Institute for Occupational Safety and Health
-
The case of a 46-year-old male electrical project supervisor who died when he contacted an energized conductor inside a control panel was examined. He ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a 30-year-old male electrical technician who was electrocuted when he inadvertently contacted an energized conductor inside a control pane ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 42-year-old male electrician apprentice was electrocuted when he lost his footing on a ladder and came in contact with an unguarded energized 480-vo ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
An electrician died from burns received when an explosion occurred as he was making a live wire connection on a circuit breaker located in a six break ...National Institute for Occupational Safety and Health
-
An electrician employed by an electrical contractor died of injuries from an electrical discharge or electrical explosion which occurred while he was ...National Institute for Occupational Safety and Health
-
A 46-year-old male electrician was electrocuted when he contacted an energized powerline while working from the bucket of an aerial lift truck. He had ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a 30 year old male electrician who was electrocuted as he and a coworker attempted to perform electrical maintenance services in a main se ...National Institute for Occupational Safety and Health
-
An electrician installing a heating/air conditioning duct system was electrocuted as he contacted a 110 volt conductor. He worked for a small company ...National Institute for Occupational Safety and Health
-
A 33 year old journeyman electrician suffered electrocution while repairing a fluorescent light fixture over a kitchen sink. While the company for whi ...National Institute for Occupational Safety and Health
-
The case of a 29 year old electrician who was electrocuted when he contacted the energized metal frame of an electrically powered foundry stoker that ...National Institute for Occupational Safety and Health
-
The case of an electrician who was electrocuted while trouble shooting a 480 volt DC generator that supplied power to a glue machine was examined. The ...National Institute for Occupational Safety and Health
-
The case of a 31 year old male electrician who was electrocuted when he contacted an energized wire as he was attempting to install a flood light on a ...National Institute for Occupational Safety and Health
-
The case of the electrocution of a worker at a construction site on October 15, 1982, was investigated. The employee at the time of the accident was w ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A worker at a fast-food restaurant located in was fatally electrocuted while inserting an electrical plug into a power receptacle mounted in a floor b ...Csamer RP
-
A case study of a worker electrocuted while guiding a load suspended from a crane was examined. A joint venture construction company was setting forms ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report of an electrocution in North Carolina was presented. The report was part of the NIOSH FA ...National Institute for Occupational Safety and Health
-
On July 30, 1985, a 22 year old employee of an electrical contractor was electrocuted while working on a 7200 volt transformer conversion at a townhou ...National Institute for Occupational Safety and Health
-
On November 2, 1988, a 47 year old male equipment operator was electrocuted when he contacted a 7,600 volt power line. The employer was a large munici ...National Institute for Occupational Safety and Health
-
The case of an equipment operator/lineman who died when the wooden crossarm of a utility pole failed, dropping energized electrical lines onto him, wa ...National Institute for Occupational Safety and Health
-
This report concerned a fatality which occurred on August 8, 1984, involving an elevator repairman working at a housing facility owned by a city housi ...Csamer RP
-
The case of an electrocution of a painter while working on an electrical transmission tower on July 14, 1983, was examined. The incident occurred whil ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
On July 12, 1983, an electrician was electrocuted while replacing a switch on a coal sampler at a coal fired powerplant. The victim was a class-A elec ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 24 year old male lineman foreman was electrocuted when he grabbed the door handle on a crane truck whose boom was in contact with a three phase 7,20 ...National Institute for Occupational Safety and Health
-
A 22 year old male foundry laborer was electrocuted when a piece of scrap metal he was loading into a damaged electric induction furnace became energi ...National Institute for Occupational Safety and Health
-
While moving a 30 foot high scaffold, contact was made with a 12,000 volt power line, killing four members of a maintenance crew at a naval installati ...National Institute for Occupational Safety and Health
-
A case study of an electrocution resulting from the testing of electrical circuits was examined. Employees of an electrical contracting firm under con ...National Institute for Occupational Safety and Health
-
A 17 year old seasonal general laborer was electrocuted while working at a facility that produced pickles. The victim and another seasonal laborer wer ...National Institute for Occupational Safety and Health
-
The electrocution deaths of a 46-year-old male heating, ventilation, and air conditioning contractor and his 23-year-old employee were reported. The e ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
An incident was described in which two workers at a hog farm died of hydrogen-sulfide (7783064) poisoning in a manure pit. A 27-year-old male hog farm ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
While simultaneously contacting an injection molding machine which was grounded and a grinding machine with a ground fault, a set up man was electrocu ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report on an electrocution in Indiana was presented. The report was part of the NIOSH FACE proj ...National Institute for Occupational Safety and Health
-
The case of a 49 year old male journeyman electrician who was electrocuted when he contacted an energized light socket containing a broken light bulb ...National Institute for Occupational Safety and Health
-
A 39 year old male journeyman electrician died when, after deenergizing one controlled access area, he mistakenly entered an identical energized area ...National Institute for Occupational Safety and Health
-
A 23-year-old male journeyman wireman was electrocuted when he contacted two phases of an energized buss inside a switchhouse at a utility company pow ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 21 year old male laborer was injured, and subsequently died, after the galvanized pipe he was carrying came in contact with a 12,500 volt jumper wir ...National Institute for Occupational Safety and Health
-
The case of a worker who was electrocuted when he touched the hoist cable of a crane in contact with an energized overhead power line was reported. Th ...National Institute for Occupational Safety and Health
-
The case of a 59 year old male laborer who was electrocuted while painting a section of support steel for a conveyor system was investigated. The empl ...National Institute for Occupational Safety and Health
-
On January 11, 1989, a 31 year old laborer was electrocuted while contacting an aerial bucket truck when the boom of the truck contacted a 7200 volt p ...National Institute for Occupational Safety and Health
-
A general handyman was electrocuted when he touched an energized cap on a well casing. The victim was employed by a gas pipeline contractor who provid ...National Institute for Occupational Safety and Health
-
While digging with a pneumatic clay spade, a laborer was electrocuted when he contacted a 13 kilovolt underground power line. He was employed by a sma ...National Institute for Occupational Safety and Health
-
A 20 year old laborer was electrocuted when the 21 foot aluminum flagpole he was installing came into contact with an overhead electric power line. He ...National Institute for Occupational Safety and Health
-
An 18 year old laborer in an oil recycling plant was electrocuted when he contacted a pump casing that was energized due to faulty wiring. The victim ...National Institute for Occupational Safety and Health
-
While attempting to repair and install a faulty, 8 foot long fluorescent light fixture, a laborer was electrocuted. He was in the third year of a 4 ye ...National Institute for Occupational Safety and Health
-
A laborer was unloading sewer pipe from a flatbed truck and was electrocuted when the boom cable of a truck mounted crane contacted an overhead high v ...National Institute for Occupational Safety and Health
-
While collecting scrap metals from property owned by a local municipality, a laborer/truck driver was electrocuted when the hoist cable of a crane con ...National Institute for Occupational Safety and Health
-
The case of a laborer who was electrocuted when the mast of a well drilling rig he was operating came in contact with a 7200 volt overhead power line ...National Institute for Occupational Safety and Health
-
The case of a 19 year old male laborer who was electrocuted when a metal work platform on which he was standing penetrated the covering of an overhead ...National Institute for Occupational Safety and Health
-
The case of a 23 year old male laborer who was electrocuted when he contacted a 115 volt power source while adjusting the limit switches on an overhea ...National Institute for Occupational Safety and Health
-
A lathe operator was electrocuted when he contacted the energized frame of a computerized lathe, February 6, 1987. The employer was a division of a ma ...National Institute for Occupational Safety and Health
-
A power company lineman (a lead line mechanic) was electrocuted while repairing storm damage to a distribution system. The lineman and a groundman beg ...National Institute for Occupational Safety and Health
-
A 58 year old male line technician employed by a utility company was electrocuted while working to restore electrical service in South Carolina in the ...National Institute for Occupational Safety and Health
-
While attempting to attach the wooden cross arm on a new utility pole under high wind conditions, an apprentice lineman was electrocuted. The new pole ...National Institute for Occupational Safety and Health
-
A construction crew consisting of a supervisor, three class A linemen (including the victim), a first class lineman, a groundman, and two truck driver ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A line crew, assigned the task of restoring power to secondary service lines at night, determined that a switch had to be opened on a pole-mounted tra ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 60 year old male lineman was electrocuted when he came in contact with a 7,200 volt cutout switch on a utility pole. He was employed by a company th ...National Institute for Occupational Safety and Health
-
The case of a 33 year old lineman who was electrocuted after contacting a 7600 volt powerline during an attempt to restore electrical power during a s ...National Institute for Occupational Safety and Health
-
A 35-year-old male lineman was electrocuted after he contacted an energized powerline while working from the bucket of an aerial lift truck. The victi ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
This report concerned the death of a 30 year old male journeyman lineman who was electrocuted while installing a guy wire. His employer was an electri ...National Institute for Occupational Safety and Health
-
On September 9, 1988, a 48 year old male journeyman lineman was electrocuted when he inadvertently contacted an energized 12,000 volt power line while ...National Institute for Occupational Safety and Health
-
A journeyman lineman with 31 years experience was electrocuted when he contacted a 34.5 kilovolt power source during replacement of a switch jumper. T ...National Institute for Occupational Safety and Health
-
A 34 year old male lineman was electrocuted while attempting to install a 37.5 kilovolt (kV) transformer on a new pole. The new pole was situated next ...National Institute for Occupational Safety and Health
-
A first class lineman with 26 years of experience was electrocuted while working on repairs at an electrical co/op substation. In response to a major ...National Institute for Occupational Safety and Health
-
A Class-A lineman was electrocuted when the boom of a digger derrick truck contacted a 7200 volt power line while he was leaning against the truck. Th ...National Institute for Occupational Safety and Health
-
The case of a 41 year old male journeyman lineman with 23 years experience who was killed when his hands contacted both sides of a switch on a pole mo ...National Institute for Occupational Safety and Health
-
On October 25, 1988, a 40 year old male lineman supervisor died when he contacted an energized conductor. The employer was a small rural electric coop ...National Institute for Occupational Safety and Health
-
An analysis was performed of an accident in which a 21 year old male lineman trainee employed by an electrical contracting company was electrocuted af ...National Institute for Occupational Safety and Health
-
On December 5, 1988, a 24 year old male boring machine operator was electrocuted when the crane moving the pipe he was guiding contacted an overhead p ...National Institute for Occupational Safety and Health
-
While repairing an air conditioning unit at an apartment complex, a maintenance manager was electrocuted. The man was employed as maintenance manager ...National Institute for Occupational Safety and Health
-
A 37 year old male maintenance mechanic was electrocuted when he grasped a power cord with damaged insulation and contacted an exposed energized condu ...National Institute for Occupational Safety and Health
-
The case of a 33 year old male maintenance supervisor who was killed when he inadvertently contacted an energized conductor (22,000 volts) in a high v ...National Institute for Occupational Safety and Health
-
The case of a 20 year old male maintenance worker trainee who died when he contacted an energized conductor in an uncovered electrical junction box wa ...National Institute for Occupational Safety and Health
-
This report concerned the death of a 53 year old steelworker who was electrocuted when he contacted the energized case of a toaster oven in the employ ...National Institute for Occupational Safety and Health
-
A mechanic for a wrecker service was electrocuted when he contacted a 7200 volt overhead power line with a two way radio antenna he was holding. The c ...National Institute for Occupational Safety and Health
-
A power company crew (a supervisor, a lineman, and two meter readers) was assigned the task of restoring secondary service to residences in an area th ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
On August 13, 1985, a mobile home assembly line worker was electrocuted when he came in contact with the exterior of a mobile home (home 1) that was e ...National Institute for Occupational Safety and Health
-
A National Guardsman was electrocuted when he climbed a tower supporting 46,000 volt transmission lines and contacted a jumper wire. The Guard had bee ...National Institute for Occupational Safety and Health
-
The cases of three construction workers who were electrocuted and three others who were seriously burned were examined. The accident occurred when the ...National Institute for Occupational Safety and Health
-
A painter was electrocuted when the metal ladder he was moving contacted an overhead powerline. The 21-year-old male painter had been employed for 2 d ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a painter who was electrocuted when the 40 foot aluminum extension ladder he and a coworker were raising contacted a 7200 volt power line ...National Institute for Occupational Safety and Health
-
A 27 year old painter was electrocuted on April 17, 1987, while wrapping plastic around an insulator in preparation for painting a steel structure in ...National Institute for Occupational Safety and Health
-
A painter was electrocuted and his co-worker injured, when a portable aluminum extension ladder contacted a 7,200-volt powerline. This incident occurr ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
The case of a 49 year old male painter who was electrocuted when he contacted a fluorescent light fixture was evaluated. The victim was employed by a ...National Institute for Occupational Safety and Health
-
A part time laborer was electrocuted when a metal pole he was carrying to the roof came in contact with a 7200 volt line. Two part time members of a c ...National Institute for Occupational Safety and Health
-
The case of a 35 year old male cable splicer who was electrocuted when he contacted an energized pipe that was connected to a 220 volt sump pump was e ...National Institute for Occupational Safety and Health
-
The case of a 37-year-old male electric utility powerline worker who was electrocuted while performing maintenance on a 7200-volt overhead powerline w ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 32 year old gilter operator was electrocuted when he entered the electrical panelboard of his machine to reset a circuit breaker. The process on whi ...National Institute for Occupational Safety and Health
-
On July 29, 1985, a 29 year old male production welder, an employee of a metal fabrication company, was plugging the cord to a portable welder into an ...National Institute for Occupational Safety and Health
-
On October 20, 1988, a 23 year old male roofer was electrocuted when the 40 foot aluminum extension ladder he was positioning contacted an overhead 72 ...National Institute for Occupational Safety and Health
-
A 21-year-old roofer's helper was electrocuted as he and a coworker were positioning a metal ladder platform hoist which contacted a powerline. The vi ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 19-year-old roofing mechanic trainee (victim) was electrocuted after he inadvertently contacted an energized service entrance conductor. At the time ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A fatal accident circumstances and epidemiology (FACE) report on an electrocution in Ohio was presented. The report was part of the NIOSH FACE project ...National Institute for Occupational Safety and Health
-
An evaluation was conducted of a 40 year old male service operations technician who died after contacting an energized 7680 volt switch while observin ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report describing an electrocution in North Carolina was presented. The report was part of the ...National Institute for Occupational Safety and Health
-
On June 27, 1985, a 33 year old sign painter was electrocuted when he made contact with a 7200 volt power line while working off of a truck mounted pl ...National Institute for Occupational Safety and Health
-
On November 29, 1988, a 45 year old male sign technician was electrocuted when a steel cable attached to the extended ladder of the ladder truck he wa ...National Institute for Occupational Safety and Health
-
A stagehand, working above the ceiling of the entertainment center, was electrocuted when he contacted an exposed electrical wire protruding from an u ...National Institute for Occupational Safety and Health
-
On September 30, 1988, a 33 year old male steel mill adjuster was electrocuted when he contacted a ventilation fan with a damaged power cord. The faci ...National Institute for Occupational Safety and Health
-
On November 24, 1988, a 45 year old male hydroelectric supervisor died as a result of massive burns sustained in an electrical fire on October 16, 198 ...National Institute for Occupational Safety and Health
-
The case of a heating, ventilating, air conditioning, and refrigeration (HVACR) technician who was electrocuted while performing refrigeration mainten ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A groundman employed by a telephone construction company was electrocuted when a hydraulic boom contacted a 7.2 kilovolt power line while a guy wire w ...National Institute for Occupational Safety and Health
-
A 24 year old male television cable installer was electrocuted when he came in contact with a 7280 volt powerline running 5 feet above the roof of a h ...National Institute for Occupational Safety and Health
-
The case of a 44-year-old fixer who was electrocuted at a textile facility when he contacted an energized electrical conductor inside a 550-volt contr ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A 19-year-old machine operator (the victim) was electrocuted at a textile plant when he contacted an energized electrical conductor inside the 570-vol ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A fatal accident circumstances and epidemiology (FACE) report on an accident involving an electrocution in Georgia was presented. The report was part ...National Institute for Occupational Safety and Health
-
A township maintenance worker was electrocuted while using an aluminum pruning pole. At the request of a resident of the township, a dead tree was bei ...National Institute for Occupational Safety and Health
-
A case study of a transportation employee electrocuted by an overhead power line was examined. A 49 year old worker for a state department of transpor ...National Institute for Occupational Safety and Health
-
A tree trimming crew was en route to a jobsite when they noticed that trees had fallen over a 4,000-volt powerline in front of a radio tower. The dama ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
A tree trimmer performing contract work for a utility company was electrocuted when he contacted a 7200 volt power line. The victim worked for a large ...National Institute for Occupational Safety and Health
-
The case of a 27 year old male tree trimming groundsman who was electrocuted while contacting an aerial bucket truck was examined. He was employed by ...National Institute for Occupational Safety and Health
-
A 20 year old male tree trimming groundsman was electrocuted when he grabbed a guy wire causing it to contact an energized conductor on a utility pole ...National Institute for Occupational Safety and Health
-
A 43 year old male truck driver died when the boom of the truck mounted crane he was operating contacted a 14,400 volt overhead powerline. The employe ...National Institute for Occupational Safety and Health
-
The case of the electrocution of a 62 year old male truck driver was examined. The man was electrocuted while touching a dump truck that became energi ...National Institute for Occupational Safety and Health
-
A truck driver was electrocuted when the bed of a dump truck he was operating contacted a 7200 volt power line. The victim was the only driver for a t ...National Institute for Occupational Safety and Health
-
A 32 year old truck driver was electrocuted when he raised the bed of the dump truck he was operating, contacting a 12 kilovolt (kV) energized power l ...National Institute for Occupational Safety and Health
-
This report concerns the death of a 20-year-old male truck driver and a 70-year-old company president who were electrocuted when the boom of a truck m ...National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program
-
On June 26, 1985, two construction workers were electrocuted and two were injured when the crane lifting a steel bucket of concrete came in contact wi ...National Institute for Occupational Safety and Health
-
While installing electrical service to a mobile home, two electrical contractor employees were electrocuted. A three man crew consisting of a foreman, ...National Institute for Occupational Safety and Health
-
While using a 36 foot aluminum extension ladder to paint a 20 foot, inverted L-shaped, metal light pole, two painters were electrocuted. One painter w ...National Institute for Occupational Safety and Health
-
The case of a 51 year old male pipefitter/welder and a 36 year old male pipe welder who died when a crane they were using to move a metal building con ...National Institute for Occupational Safety and Health
-
Several workers were moving scaffolding when it contacted a 13,750 volt overhead power line, killing two of the workers and injuring five others. The ...National Institute for Occupational Safety and Health
-
On December 11, 1984, two workers were electrocuted while guiding a steel structure being lifted into place by a 48 foot telescoping boom crane, and a ...National Institute for Occupational Safety and Health
-
Two laborers caulking and painting around elevated church windows were electrocuted after the 25 foot scaffold they were moving contacted a high volta ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology (FACE) report describing an electrocution in California was presented. The report was part of the NIOS ...National Institute for Occupational Safety and Health
-
This report concerned the death of a 29 year old utility lineman who was electrocuted when he simultaneously contacted both ends of a temporary fused ...National Institute for Occupational Safety and Health
-
A 21 year old utility man was electrocuted while disconnecting the power source to a knitting machine motor. He inadvertently touched an energized pro ...National Institute for Occupational Safety and Health
-
A case study of an electrocution of a video store owner was examined. A small pharmacy had been remodeled to serve as a video rental store. Remodeling ...National Institute for Occupational Safety and Health
-
The case of a 41 year old male welder who died when he came in contact with an energized overhead crane contact conductor was examined. The employer w ...National Institute for Occupational Safety and Health
-
The case of a 26 year old male welder/pipefitter who died when he contacted an energized electrical conductor and fell to a concrete floor 29 feet bel ...National Institute for Occupational Safety and Health
-
A 33 year old male well driller was electrocuted when a metal pipe that was being hoisted with a truck mounted crane contacted a three phase, 12,000 v ...National Institute for Occupational Safety and Health
-
"To identify and describe trends in traumatic occupational fatalities due to contact with electrical energy, review recommended prevention strategies, ...National Institute for Occupational Safety and Health
-
To identify and describe trends in traumatic occupational fatalities due to contact with electrical energy, review recommended prevention strategies, ...Casini VJ ;Kisner S
-
A case study of a worker electrocuted by a 7,200 Volt (V) power line was examined. The accident occurred as workers of an electrical construction comp ...National Institute for Occupational Safety and Health
-
A case study of a worker electrocuted at an electric substation tower was examined. Two brothers were contracted to demolish an abandoned electric sub ...National Institute for Occupational Safety and Health
-
A fatal accident circumstances and epidemiology report on an accident involving an electrocution is presented. The report is part of a NIOSH project i ...National Institute for Occupational Safety and Health
-
While steam cleaning a rubber mill, a worker suffered electrocution. The on/off switch on the mill was not watertight and steam entered the switch, co ...National Institute for Occupational Safety and Health
-
A 20 year old male maintenance laborer at a rubber products plant was electrocuted on July 8, 1985 when a piece of angle iron he was carrying struck a ...National Institute for Occupational Safety and Health
-
A case study of a worker electrocuted when a crane load line contacted a power line was examined. The victim's employer had contracted with a crane re ...National Institute for Occupational Safety and Health
File Language:
English
Stout, N. A., Casini, V., & Kisner, S. (2000). Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health. https://stacks.cdc.gov/view/cdc/237036
Stout, Nancy A., Virgil Casini, and Suzanne Kisner. Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health, 2000. https://stacks.cdc.gov/view/cdc/237036.
Stout, Nancy A., et al. Worker Deaths by Electrocution: A Summary of NIOSH Surveillance and Investigative Findings: NIOSH 2000-115. National Institute for Occupational Safety and Health, 2000, Stacks. https://stacks.cdc.gov/view/cdc/237036.
CDC STACKS serves as an archival repository of CDC-published products including
scientific findings, journal articles, guidelines, recommendations, or other public health information authored or
co-authored by CDC or funded partners.
As a repository, CDC STACKS retains documents in their original published format to ensure public access to scientific information.
As a repository, CDC STACKS retains documents in their original published format to ensure public access to scientific information.