Report of Investigations 9655: Geomechanics of Reinforced Cemented Backfill in an Underground Stope at the Lucky Friday Mine, Mullan, Idaho

Details

• Journal Article:
  National Institute for Occupational Safety and Health
• Personal Author:
  Williams, Theodore J. ; Denton, David K. ; Larson, Mark K. ; Rains, Richard L. ; Seymour, Joseph B. ; Tesarik, Douglas R.
• Description:
  Because backfill has occasionally collapsed into an active working area, posing a hazard to miners, engineers from the Spokane Research Laboratory of the National Institute for Occupational Safety and Health and Hecla Mining Company installed instruments in a cemented, backfilled, stope-ramp intersection at Hecla's Lucky Friday Mine, Mullan, Idaho. The purpose was to measure stress and strain changes in the backfill and reinforcing members during undercut mining. The instruments were monitored for 6 months while three successive cuts were mined below the intersection. Readings showed induced loads up to 3450 kPa (500psi) in the backfill as stope walls converged 2.5 to 12 cm (1 to 5 in.). The backfill then deformed against the top and bottom plates of the 2-m- (6-ft-) long vertical rock bolts installed as reinforcement, producing loads to 177 kN (40,000 lb) on the rock bolts. We hypothesize that a compressive zone was created in the backfill that allowed the backfill to remain stable as long as the compressive zones from adjacent rock bolts overlapped. This hypothesis is presented in graphical form. Of particular interest was the effect of loading on trusses installed to augment the vertical rock bolts and wire mesh typically installed in backfill. Data from the instruments indicate that wall closure perpendicular to the vein induced loads in truss legs parallel to the vein and in the rock bolt driven through the center of the truss, but, because they are designed to function under tension, truss legs perpendicular to the vein supplied insignificant support as a result of compressional forces from wall closure. Based on this study, use of trusses was discontinued, and an alternative support system of wood beams and posts was installed as needed to ensure the safety of miners working beneath the backfill in stope-ramp intersections. [Description provided by NIOSH]
• Content Notes:
  T.J. Williams, D.K. Denton, M.K. Larson, R.L. Rains, J.B. Seymour, and D.R. Tesarik
  
  Includes bibliographical references (p. 16-17).
  
  
• Subjects:
  Accident Prevention Accidents Engineering Mining Occupational Health Safety
• Keywords:
  Mining-industry; Mining-equipment; Mine-workers; Miners; Accident-prevention; Engineering-controls; Safety-practices; Safety-engineering
• Source:
  Spokane, WA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2001-138, (RI 9655), 2001 Jul; :1-18
• Series:
  NIOSH Numbered Publications
• Subseries:
  Report of Investigations
• DOI:
  https://doi.org/10.26616/NIOSHPUB2001138
• Publisher:
  National Institute for Occupational Safety and Health
• Document Type:
  Text
• Genre:
  Report
• Place as Subject:
  Idaho ; OSHA Region 10 ; Washington
• CIO:
  National Institute for Occupational Safety and Health (NIOSH)
• Division:
  SRL - Spokane Research Laboratory
• Topic:
  Workplace Safety & Health
• Location:
  North America
• Pages in Document:
  24 pdf pages
• NIOSHTIC Number:
  nn:20021603
• NTIS Accession Number:
  PB2002-101210
• Federal Fiscal Year:
  2001
• NORA Priority Area:
  Other Occupational Concerns
• Peer Reviewed:
  False
• Collection(s):
  National Institute for Occupational Safety and Health
• Main Document Checksum:
  urn:sha-512:381ca42ca53c522058d8189db8df9f140040cea5adfe7c794256d84b50affb188f31166171aa85507c9a762ad0d4d0a42b5f05dddd4b20900b3aedc4809a83ab
• Download URL:
  https://stacks.cdc.gov/view/cdc/6443/cdc_6443_DS1.pdf
• File Type:
  [PDF - 7.96 MB ]