Welcome to CDC stacks | Video Motion Detection for Real-Time Hazard Warnings in Surface Mines - 9294 | National Institute for Occupational Safety and Health
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Video Motion Detection for Real-Time Hazard Warnings in Surface Mines
  • Published Date:
    0/1/1900
Filetype[PDF-1.06 MB]


Details:
  • Personal Authors:
    McHugh, Edward L.
  • Keywords:
  • Description:
    Digital camera and computer technologies can be used to monitor mine slopes and provide real-time warning of rock falls. NIOSH researchers assembled a surveillance system using low-cost video cameras and computer software from the security industry to test its effectiveness. The system is designed to signal an alarm when motion is detected and to record images of the scene. Masking can restrict motion detection to specific areas within the camera view; sensitivity is adjustable. The time-stamped images provide a record that can help reconstruct and quantify an event. Video motion detection can augment standard monitoring methods to increase safety in surface mines.

  • Collection(s):
    National Institute for Occupational Safety and Health
  • Supporting Files:
    No Additional Files
No Related Documents.
You May Also Like:
  1. Evaluating techniques for monitoring rock falls and slope stability
    Personal Author:
    McHugh, Edward L.; Girard, Jami M.;
    Corporate Author:
    Spokane Research Laboratory (National Institute for Occupational Safety and Health)
    Published:
    2002
    Source:
    Proceedings of the 21st International Conference on Ground Control in Mining, August 6-8, 2002, Morgantown, West Virginia. Peng SS, Mark C, Khair AW, Heasley KA, eds., Morgantown, WV: West Virginia University, 2002 Aug; :335-343
    Description:
    "While less than 1% of reported accidents are associated with slope stability problems, slope failures were responsible for about 15% of all U.S. surface mine fatalities between 1995 and 2001. Small rockfalls, which may involve hand-sized rocks weigh...
    File Type:
    Filetype[PDF - 2.94 MB]
  2. Preventing Collisions Involving Surface Mining Equipment: A GPS-Based Approach
    Personal Author:
    Ruff, Todd M.; Holden, Thomas P.;
    Published:
    0/1/1900
    Description:
    Problem: An average of three workers a year are killed in surface mining operations when a piece of haulage equipment collides with another smaller vehicle or a worker on foot. Another three workers are killed each year when haulage equipment backs o...
    File Type:
    Filetype[PDF - 833.81 KB]
  3. A visual warning system to reduce struck-by or pinning accidents involving mobile mining equipment
    Personal Author:
    Sammarco, J.; Gallagher, S.; Mayton, A.; Srednicki, J.;
    Published:
    Apr 12 2012
    Source:
    Appl Ergon. 43(6):1058-1065.
    Description:
    This paper describes an experiment to examine whether a visual warning system can improve detection of moving machine hazards that could result in struck-by or pinning accidents. Thirty-six participants, twelve each in one of three age groups, partic...
    File Type:
    Filetype[PDF - 880.09 KB]
  4. A Technology review of smart sensors with wireless networks for applications in hazardous work environments
    Personal Author:
    Sammarco, John J.; Paddock, Robert.; Fries, Edward F.; Karra, Vijia K.;
    Corporate Author:
    Pittsburgh Research Laboratory (National Institute for Occupational Safety and Health)
    Published:
    April 2007
    Series:
    Information circular (National Institute for Occupational Safety and Health) ; IC 9496
    DHHS publication ; no. (NIOSH) 2007-114
    Description:
    Workers in hazardous environments such as mining are constantly exposed to the health and safety hazards of dynamic and unpredictable conditions. One approach to enable them to manage these hazards is to provide them with situational awareness: real-...
    File Type:
    Filetype[PDF - 1.11 MB]
  5. Tell me a story : why stories are essential to effective safety training
    Personal Author:
    Fein, Albert H.; Cullen, E. T. (Elaine T.);
    Corporate Author:
    Spokane Research Laboratory (National Institute for Occupational Safety and Health)
    Published:
    August 2005
    Series:
    Report of investigations ( National Institute for Occupational Safety and Health) ; RI-9664
    DHHS publication ; no. (NIOSH) 2005-152
    Description:
    Federal law mandates that all miners receive safety and health training when first entering the mining industry and at least 8 hours annually thereafter. Although the mining industry has historically relied on an experiential master-apprentice model ...
    File Type:
    Filetype[PDF - 2.69 MB]