Details:

Personal Author:
Signer, Steve ; Pile, James ; Bessinger, Steve
Signer, Steve ; Pile, James ; Bessinger, Steve Less -
Corporate Authors:
Spokane Research Center (National Institute for Occupational Safety and Health)
Conference Authors:
International Conference on Ground Control in Mining (23rd : 2004 August 3-5 : Morgantown, WV)
Description:
The San Juan Mine and the National Institute for Occupational Safety and Health conducted a study to measure how development mining affected bolt loads. Twelve fully grouted, instrumented roof bolts were installed at two three-way intersections as part of the standard bolting pattern. Newly developed miniature data acquisition systems (MIDAS) were used to measure bolt load changes during initial face advance and cross-cut breakthrough. The effects of cut placement and depth on roof bolt loads were studied. This test showed how bolt loads increased at five positions along the bolt length during initial mining. Both entry advance and cross-cut breakthrough produced a similar percentage of increase in bolt loads. Geologic differences between the test sites were probably responsible for the differences in amounts of bolt loading. The test site with more top coal and a higher rock quality designation (RQD) had lower bolt loads.
Subject:
[+]
Mining

Source:
Proceedings of the 23rd International Conference on Ground Control in Mining, August 3-5, 2004, Morgantown, West Virginia. Peng SS, Mark C, Finfinger GL, Tadolini SC, Heasley KA, Khair AW eds., Morgantown, WV: West Virginia University, 2004 Aug; :250-257
Document Type:
Book Chapter
Genre:
Conference Publications
Collection(s):
National Institute for Occupational Safety and Health
Main Document Checksum:
[+]
urn:sha256:33c5da2e3009d7c148f61c3cf86bd9541c9f2caab61911712589aacf4c214d74
File Type:

Supporting Files

• No Additional Files

More +