Welcome to CDC Stacks | Evaluation of instrumented cable bolts in cement grout to determine physical and numerical modeling properties - 5222 | Stephen B. Thacker CDC Library collection
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Evaluation of instrumented cable bolts in cement grout to determine physical and numerical modeling properties
  • Published Date:
    April 2004
Filetype[PDF - 6.91 MB]


This document cannot be previewed automatically as it exceeds 5 MB
Please click the thumbnail image to view the document.
Evaluation of instrumented cable bolts in cement grout to determine physical and numerical modeling properties
Details:
  • Corporate Authors:
    Spokane Research Laboratory (National Institute for Occupational Safety and Health) ; Pakalnis, Rimas Thomas, 1956- ;
  • Series:
    Report of investigations (National Institute for Occupational Safety and Health) ; 9662
    DHHS publication ; no. (NIOSH) 2004-140
  • Document Type:
  • Description:
    "Whereas many researchers and mine engineers have conducted tests on cable bolts using various grouts, water:cement ratios, and physical modifications of the cable to determine the load-carrying characteristics of a bolt, few studies have been conducted on cable bolts fitted with internal instruments. Those studies that have been done have concentrated on cable response averaged over significant (6.1 m) cable lengths. Researchers at the Spokane Research Laboratory (SRL) of the National Institute for Occupational Safety and Health in Spokane, W A, are investigating the physical properties of cable bolts by replacing the conventional king wire with a modified king wire on which strain gauges have been installed. A numerical analysis was performed to match laboratory results. Loads calculated by the model were then compared to loads measured in the laboratory on 1.83-m-long cables grouted into two 0.91-m-long pull-tube assemblies. Load along the cable was monitored with 20 strain gauges installed along the length of the cable. This paper documents test results on these modified cable bolts. The instrumented cable bolt provided reproducible point measurements of cable load as opposed to load measurements averaged over long cable lengths. Such point measurements can assist in interpreting the influence of cable confinement, grout quality, rock mass stiffness, and other factors. The instrumented cable bolt is a practical field and research tool because it can predict point loading along the cable. The instrument has been successfully field tested at FMC's Granger Mine, Granger, WY; the Meikle Mine, Carlin, NY; the Stillwater Mine, Nye, MT; and the Getchell Mine, Golconda, NY. By monitoring load and displacement of the rock mass using these instrumented bolts, more-effective ground support can be selected and installed, which will lead to safer working conditions for miners." - NIOSHTIC-2

  • Supporting Files:
    No Additional Files