Welcome to CDC stacks |
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Use of reservoir simulation and in-mine ventilation measurements to estimate coal seam properties
  • Published Date:
    Oct 2014
  • Source:
    Int J Rock Mech Min Sci (1997). 63:148-158.
Filetype[PDF-1.57 MB]


Details:
No Related Documents.
You May Also Like:
  1. Reservoir Modeling-Based Prediction And Optimization Of Ventilation Requirements During Development Mining In Underground Coal Mines
    Personal Author:
    Karacan, C. Ö.; Schatzel, S. J.;
    Published Date:
    1/1/2008
    Description:
    During development mining, ventilation capacity may decrease and the ventilation requirements may depart from initially planned values depending on the mining rate, increases in the methane emission rate, and changes in ventilation airway leakages. I...
    File Type:
    Filetype[PDF - 152.09 KB]
  2. Evaluation of the relative importance of coalbed reservoir parameters for prediction of methane in?ow rates during mining of longwall development entries
    Personal Author:
    Karacan, C. Ö.
    Published Date:
    1/1/2008
    Description:
    This study presents a reservoir modeling approach to investigate the relative effects of different coalbed parameters on the migration of methane into development entries. A base coalbed reservoir model of a three-entry development section, where gri...
    File Type:
    Filetype[PDF - 662.38 KB]
  3. Handbook for methane control in mining
    Personal Author:
    Kissell, Fred N.; Diamond, William P.; Beiter, Dennis A.; Taylor, Charles D.; Goodman, Gerrit V. R.; Cecala, Andrew B.; Urosek, John E.; Francart, William J.; Thakur, Pramod C; Ulery, James P.; Volkwein, Jon C.; Cashdollar, Kenneth L.; Sapko, Michael J.; Head, H. John;
    Corporate Authors:
    Pittsburgh Research Laboratory (National Institute for Occupational Safety and Health)
    Published Date:
    June 2006
    Series:
    Information circular (National Institute for Occupational Safety and Health) ; IC 9486
    DHHS publication ; no. (NIOSH) 2006-127
    Description:
    "This handbook describes effective methods for the control of methane gas in mines and tunnels. It assumes the reader is familiar with mining. The first chapter covers facts about methane important to mine safety, such as the explosibility of gas mix...
    File Type:
    Filetype[PDF - 4.39 MB]
  4. Guidelines for the prediction and control of methane emissions on longwalls
    Personal Author:
    Esterhuizen, Gabriel S.; Goodman, Gerrit V. R.; Karacan, C. Özgen; Krog, Robert B.; Schatzel, Steven J.;
    Corporate Authors:
    National Institute for Occupational Safety and Health. Pittsburgh Research Laboratory (National Institute for Occupational Safety and Health).
    Published Date:
    March 2008
    Series:
    DHHS publication ; no. (NIOSH) 2008-114
    Information circular (National Institute for Occupational Safety and Health) ; IC 9502
    Description:
    "Although longwall mining productivity can far exceed that of room-and-pillar mining, the total methane emissions per extracted volume associated with longwall sections are generally higher than those for continuous miner or pillar removal sections. ...
    File Type:
    Filetype[PDF - 3.77 MB]
  5. Reservoir Engineering Considerations For Coal Seam Degasification And Methane Control In Underground Coal Mines
    Personal Author:
    Karacan, C. Özgen
    Published Date:
    1/1/2009
    Description:
    Degasification and methane control in underground coal mining is an important area augmenting conventional ventilation in order to prevent possible fires and explosions due to excessive methane emissions. Coal bed reservoir engineering has been appli...
    File Type:
    Filetype[PDF - 4.08 MB]