Analysis of Post-Explosion Residues for Estimating Flame Travel During Coal Dust Deflagrations

Details

• Personal Author:
  Harris, Marcia L. ; Man, Chi-Keung ; Weiss, Eric S.
• Description:
  Fine coal particles are produced in underground coal mines during the mining process. These particles can cause an explosion if they are entrained and ignited. However, this type of explosion hazard in underground coal mines can be reduced by applying generous quantities of incombustible rock dust to the entries, including the roof, rib, and floor areas. The National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) has conducted a series of large-scale explosion experiments at the Lake Lynn Experimental Mine (LLEM) to investigate the inerting effect of limestone rock dust. Numerous experiments were conducted using a pulverized Pittsburgh coal dust (PPC) mixed with limestone rock dust to achieve total incombustible contents varying from 67 to 82%. These dust mixtures were entrained and were subsequently ignited, if insufficient incombustible was present, by the ignition of a methane-air zone located at the closed end of the entry. Electronic flame sensors were positioned at regular intervals along the length of the entry to measure the flame travel. Post-explosion dust residue samples were taken along the entry after each explosion and analyzed to infer flame travel by measuring the thermal decomposition of limestone rock dust. Alcohol coking indices of the post-explosion residues were also measured. The alcohol coking test method is a forensic tool currently used by the Mine Safety and Health Administration (MSHA) in accident investigations.The determination of the extent of flame travel by these different measurement methods are discussed and compared. The rock dust solubility test described in this paper could assist accident investigators in more accurately establishing the flame limits of a dust explosion. [Description provided by NIOSH]
• Subjects:
  Coal Coal Mining Dust Explosions Microbiology Mining Occupational Health Particulate Matter Safety
• Keywords:
  Author Keywords: Coal Dust Coal-dust Coal-mining Explosion Explosive-dusts Explosive-hazards Forensic Microscopic-analysis Mine-disasters Mine-fires Mine-gases Nanotechnology Particle-aerodynamics Particulate-dust Particulate-sampling-methods Rock-bursts Rock Dust Surface-properties Underground-mining

  More +
• Series:
  Mining Publications
• ISSN:
  1347-9466
• Document Type:
  Text
• Genre:
  Journal Article
• Place as Subject:
  OSHA Region 3 ; Pennsylvania
• CIO:
  National Institute for Occupational Safety and Health (NIOSH)
• Division:
  OMSHR - Office of Mine Safety and Health Research
• Topic:
  Workplace Safety & Health
• Location:
  North America
• Pages in Document:
  136-140
• Volume:
  72
• Issue:
  5
• NIOSHTIC Number:
  nn:20040046
• Citation:
  Sci Technol Energ Mater 2011 Oct-Nov; 72(5):136-140
• Contact Point Address:
  Fires and Explosions Branch, Office of Mine Safety and Health Research (OMSHR), National Institute for Occupational Safety and Health (NIOSH), 626 Cochrans Mill Road, Pittsburgh, PA 15236
• Email:
  cman@cdc.gov
• CAS Registry Number:
  Methane (CAS RN 74-82-8)
• Federal Fiscal Year:
  2012
• NORA Priority Area:
  Mining
• Peer Reviewed:
  False
• Source Full Name:
  Science and Technology of Energetic Materials
• Collection(s):
  National Institute for Occupational Safety and Health
• Main Document Checksum:
  urn:sha-512:6e3143ea01f95ffe4e5c1ebf0a0f7d5d5165f951dc6c55eabbc7649f2436bfde534bdc23534b81d43980459806f429615d71f302619df09879754fbfba037075
• Download URL:
  https://stacks.cdc.gov/view/cdc/227393/cdc_227393_DS1.pdf
• File Type:
  [PDF - 291.49 KB ]