Welding safely
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.

Search our Collections & Repository

For very narrow results

When looking for a specific result

Best used for discovery & interchangable words

Recommended to be used in conjunction with other fields

Dates

to

Document Data
Library
People
Clear All
Clear All

For additional assistance using the Custom Query please check out our Help Page

CDC STACKS serves as an archival repository of CDC-published products including scientific findings, journal articles, guidelines, recommendations, or other public health information authored or co-authored by CDC or funded partners. As a repository, CDC STACKS retains documents in their original published format to ensure public access to scientific information.
Filetype[PDF-492.66 KB]


English

Details:

  • Corporate Authors:
  • Description:
    Several potential health and safety problems associated with welding are noted in this pamphlet. These problems vary with the method of welding, location of work, materials being welded, and the instituted control measures. Certain hazards are common to most welding processes. These include damage to the eyes and skin from infrared and ultraviolet radiation, burns from contact with hot metal or sparks, adverse physiological effects from breathing metal fumes and gases, accidents from material handling, and shock from electrical current. Welding hazards are controlled by employing proper ventilation principles, using respirators and other personal protective devices including proper clothing and by following safe working practices in general. The responsibility of management is to alert the workers to the hazards and the means by which to avoid them. Each worker should properly maintain and operate his welding equipment in such a manner as to avoid undue risk to health and safety. Workers should abide by safety measures required for each type of welding, avoid electric shock, maintain equipment in good mechanical and electrical condition, be alert to possible fire hazards, utilize all required protective equipment and clothing, check the ventilation system before working and periodically thereafter, never weld inside drums or other confined spaces without adequate ventilation or respirators, never weld in the same working area where degreasing or other cleaning operations are performed, and cooperate with facility management in reporting defective equipment and hazardous conditions.

    1972, reprinted 1973

  • Subjects:
  • Series:
  • DOI:
  • Document Type:
  • Place as Subject:
  • Pages in Document:
    5 numbered pages
  • Resource Number:
    DHEW publication ; no. (NIOSH) 72-10261
  • Collection(s):
  • Main Document Checksum:
  • Download URL:
  • File Type:

You May Also Like

Checkout today's featured content at stacks.cdc.gov