Welcome to CDC stacks |
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Advanced Measurement Methods in Mining - Introduction
  • Published Date:
    1/1/2009
Filetype[PDF-2.39 MB]


Details:
  • Personal Author:
    Ambrose, Dean H.
  • Description:
    [Mining and processing earth's materials form the basic building blocks from which many technology advancements and products are made. Virtually all metallic and non- metallic products are derived from a substance found in our earth that we blend, mold, extrude, or pulverize into something useful, the mining industry is responsible for the first step of this process: extraction from the ground. Mining particularly coal mining. poses significant risks to both humans and machines. As raw materials are]
  • Subject:
  • Collection(s):
    National Institute for Occupational Safety and Health
  • Main Document Checksum:
  • Supporting Files:
    No Additional Files
No Related Documents.
You May Also Like:
  1. Assessment of respirator fit capability test criteria for full-facepiece air-purifying respirators
    Personal Author:
    Bergman, Michael S.; Zhuang, Ziging; Xu, Susan Shuhong; Rengasamy, Samy; Lawrence, Robert B.; Boutin, Brenda; Harris, James R.;
    Published Date:
    May 20 2019
    Source:
    J Occup Environ Hyg. 16(7):489-497
    Description:
    An ASTM International subcommittee on Respiratory Protection, F23.65 is currently developing a consensus standard for assessing respirator fit capability (RFC) criteria of half-facepiece air-purifying particulate respirators. The objective of this st...
    File Type:
    Filetype[PDF - 507.79 KB]
  2. Recommended test methods and pass/fail criteria for a respirator fit capability test of half-mask air-purifying respirators
    Personal Author:
    Zhuang, Ziqing; Bergman, Michael; Lei, Zhipeng; Niezgoda, George; Shaffer, Ronald;
    Published Date:
    June 2017
    Source:
    J Occup Environ Hyg. 14(6):473-481
    Description:
    This study assessed key test parameters and pass/fail criteria options for developing a respirator fit capability (RFC) test for half-mask air-purifying particulate respirators. Using a 25-subject test panel, benchmark RFC data were collected for 101...
    File Type:
    Filetype[PDF - 469.15 KB]
  3. Development of a Manikin-Based Performance Evaluation Method for Loose-Fitting Powered Air-Purifying Respirators
    Personal Author:
    Bergman, Mike; Basu, Rohan; Lei, Zhipeng; Niezgoda, George; Zhuang, Ziqing;
    Published Date:
    2017
    Source:
    J Int Soc Respir Prot. 34(1):40-57
    Description:
    Objective:Loose-fitting powered air-purifying respirators (PAPRs) are increasingly being used in healthcare. NIOSH has previously used advanced manikin headforms to develop methods to evaluate filtering facepiece respirator fit; research has now begu...
    File Type:
    Filetype[PDF - 1.36 MB]
  4. Evaluation of the impact of the revised National Institute for Occupational Safety and Health Lifting Equation
    Personal Author:
    Lu, Ming-Lun; Putz-Anderson, Vern; Garg, Arun; Davis, Kermit;
    Published Date:
    Jan 28 2016
    Source:
    Hum Factors. 58(5):667-682.
    Description:
    ObjectiveTo evaluate the impact of the revised National Institute for Occupational Safety and Health lifting equation (RNLE).BackgroundThe RNLE has been used extensively as a risk assessment method for prevention of low back pain (LBP). However, the ...
    File Type:
    Filetype[PDF - 197.89 KB]
  5. Analysis of heat loss mechanisms for mobile tent-type refuge alternatives
    Personal Author:
    Bissert, P.T.; Yantek, D.S.; Klein, M.D.; Yan, L.;
    Published Date:
    2016
    Source:
    Trans Soc Min Metall Explor Inc. 340(1):70-74.
    Description:
    Federal regulations require that refuge alternatives (RAs) be located within 305 m (1,000 ft) of the working face and spaced at one-hour travel distances in the outby area in underground coal mines, in the event that miners cannot escape during a dis...
    File Type:
    Filetype[PDF - 416.72 KB]