Microseismic Activity Associated With A Deep Longwall Coal Mine
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
i

Superseded

This Document Has Been Replaced By:

i

Retired

This Document Has Been Retired

i

Up-to-date Information

This is the latest update:

Microseismic Activity Associated With A Deep Longwall Coal Mine
  • Published Date:

    0/1/1900

Filetype[PDF-443.82 KB]


Details:
  • Personal Author:
  • Description:
    A deep longwall coal mine was instrumented with a three-dimensional microseismic system in order to help determine the exact strata mechanics associated with the rock failure, redistribution of stress and the associated gob formation from the longwall. Overall, 5,000 well calibrated seismic events were recorded during the mining of the panel. Analysis of these events showed a close correlation between the seismic activity and advance rate, and that the majority of the recorded seismic activity occurs in the immediate area of the advancing longwall face.
  • Subject:
  • Collection(s):
    National Institute for Occupational Safety and Health
  • Main Document Checksum:
  • File Type:
  • Supporting Files:
    No Additional Files
No Related Documents.

You May Also Like:

  1. Filetype[PDF - 2.02 MB]
    Personal Author:
    Burgess-Limerick, Robin; Steiner, Lisa;
    Published Date:
    0/1/1900
    Description:
    In 2004, there were 646 underground coal mines in the USA employing 37,445 miners. These mines reported 3556 injuries to MSHA that year - 17% were associated with bolting machines (593 injuries), 8% with continuous miners (283 injuries), and 4% each ...
    File Type:
    Filetype[PDF - 2.02 MB]
  2. Filetype[PDF - 1.81 MB]
    Personal Author:
    Torma-Krajewski, Janet; Steiner, Lisa; Lewis, Pauline; Gust, Paul; Johnson, Kean;
    Published Date:
    0/1/1900
    Description:
    Since 1990 and the publication of the Ergonomics Program Management Guidelines for Meatpacking Plants by the US Occupational Safety and Health Administration, numerous reports of companies implementing ergonomics program have been published. However,...
    File Type:
    Filetype[PDF - 1.81 MB]
  3. Filetype[PDF - 423.53 KB]
    Personal Author:
    Whyatt, J.; Varley, F.;
    Published Date:
    1/1/2009
    Description:
    A variety of dynamic failure cases with regional impact were described at a bump symposium held in 1958. These types of events, while rare, are of particular interest because their ability to impact a large area has disaster potential. These cases ca...
    File Type:
    Filetype[PDF - 423.53 KB]
  4. Filetype[PDF - 467.25 KB]
    Personal Author:
    Peters, Robert H.; Fotta, Barbara; Mallett, Launa G.;
    Published Date:
    0/1/1900
    Description:
    Due to variations in the thickness of U.S. coal seams, there is great variability in the height of the roof where underground miners work. Restrictions imposed by low seam heights have important safety consequences. As the height of their workplace d...
    File Type:
    Filetype[PDF - 467.25 KB]
  5. Filetype[PDF - 2.55 MB]
    Personal Author:
    Mallett, Launa; Vaught, Charles; Bmick, Michael J ,Jr.;
    Published Date:
    0/1/1900
    Description:
    Since 1991 the Pittsburgh Research Center (PRC formerly part of the U. S. Bureau of Mines) has been tapping u valuable resource-researchers have recorded extensive interviews will, 30 individuals who are recognized as experts in the area of mine emer...
    File Type:
    Filetype[PDF - 2.55 MB]