Distinguishing Motor Starts From Short Circuits Through Phase-Angle Measurements
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
i

Superseded

This Document Has Been Replaced By:

i

Retired

This Document Has Been Retired

i

Up-to-date Information

This is the latest update:

Distinguishing Motor Starts From Short Circuits Through Phase-Angle Measurements
  • Published Date:

    0/1/1900

Filetype[PDF-162.73 KB]


Details:
  • Supporting Files:
    No Additional Files
No Related Documents.

You May Also Like:

  1. Filetype[PDF - 2.02 MB]
    Personal Author:
    Burgess-Limerick, Robin; Steiner, Lisa;
    Published Date:
    0/1/1900
    Description:
    In 2004, there were 646 underground coal mines in the USA employing 37,445 miners. These mines reported 3556 injuries to MSHA that year - 17% were associated with bolting machines (593 injuries), 8% with continuous miners (283 injuries), and 4% each ...
    File Type:
    Filetype[PDF - 2.02 MB]
  2. Filetype[PDF - 1.81 MB]
    Personal Author:
    Torma-Krajewski, Janet; Steiner, Lisa; Lewis, Pauline; Gust, Paul; Johnson, Kean;
    Published Date:
    0/1/1900
    Description:
    Since 1990 and the publication of the Ergonomics Program Management Guidelines for Meatpacking Plants by the US Occupational Safety and Health Administration, numerous reports of companies implementing ergonomics program have been published. However,...
    File Type:
    Filetype[PDF - 1.81 MB]
  3. Filetype[PDF - 423.53 KB]
    Personal Author:
    Whyatt, J.; Varley, F.;
    Published Date:
    1/1/2009
    Description:
    A variety of dynamic failure cases with regional impact were described at a bump symposium held in 1958. These types of events, while rare, are of particular interest because their ability to impact a large area has disaster potential. These cases ca...
    File Type:
    Filetype[PDF - 423.53 KB]
  4. Filetype[PDF - 467.25 KB]
    Personal Author:
    Peters, Robert H.; Fotta, Barbara; Mallett, Launa G.;
    Published Date:
    0/1/1900
    Description:
    Due to variations in the thickness of U.S. coal seams, there is great variability in the height of the roof where underground miners work. Restrictions imposed by low seam heights have important safety consequences. As the height of their workplace d...
    File Type:
    Filetype[PDF - 467.25 KB]
  5. Filetype[PDF - 2.55 MB]
    Personal Author:
    Mallett, Launa; Vaught, Charles; Bmick, Michael J ,Jr.;
    Published Date:
    0/1/1900
    Description:
    Since 1991 the Pittsburgh Research Center (PRC formerly part of the U. S. Bureau of Mines) has been tapping u valuable resource-researchers have recorded extensive interviews will, 30 individuals who are recognized as experts in the area of mine emer...
    File Type:
    Filetype[PDF - 2.55 MB]