Welcome to CDC stacks | Current State Of Insert-Type Hearing Protector Fit-Testing: Follow-On Measurements In The Steel Industry And Fit-Testing In A Mobile Environment - 8634 | National Institute for Occupational Safety and Health
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Current State Of Insert-Type Hearing Protector Fit-Testing: Follow-On Measurements In The Steel Industry And Fit-Testing In A Mobile Environment
  • Published Date:
    0/1/1900
Filetype[PDF-1.21 MB]


Details:
  • Supporting Files:
    No Additional Files
No Related Documents.
You May Also Like:
  1. Proceedings; best practices in hearing loss prevention : October 28, 1999 : Detroit, Michigan
    Corporate Author:
    National Institute for Occupational Safety and Health; National Hearing Conservation Association; Wayne State University, Occupational and Environmental Health Sciences Department.;
    Conference Author:
    Conference on Hearing Loss Prevention (1999 : Detroit, Michigan)
    Published:
    2001
    Series:
    DHHS publication ; no. (NIOSH) 2000-157
    Description:
    "On October 28, 1999, leaders from industry, government, labor, professional and trade organizations, and academia met in Detroit to share best practices for preventing work-related hearing impairment. The symposium highlighted an array of proven str...
    File Type:
    Filetype[PDF - 820.71 KB]
  2. Evaluation of noise exposures in the knockoff areas of an iron foundry
    Personal Author:
    Brueck, Scott E.
    Corporate Author:
    National Institute for Occupational Safety and Health.
    Published:
    March 2017
    Series:
    NIOSH health hazard evaluation report ; 2009-0224-3274
    Description:
    The Health Hazard Evaluation Program received a request from a gray and ductile iron foundry. The employer was concerned about noise exposures in the knockoff areas of the facility. The foundry had seven knockoff areas where employees separated ducti...
    File Type:
    Filetype[PDF - 2.67 MB]
  3. Preventing occupational hearing loss; a practical guide
    Personal Author:
    Franks, John R. (John Robert); Stephenson, Mark; Merry, Carol J.;
    Corporate Author:
    National Institute for Occupational Safety and Health, Physical Agents Effects Branch.
    Published:
    June 1996, revised October 1996 (with minor formatting changes)
    Series:
    DHHS publication ; no. (NIOSH) 96-110
    Description:
    This guide presented some of the important attributes which successful hearing loss prevention programs have incorporated. The items were presented as they affect three different levels of those responsible for program implementation: management; tho...
    File Type:
    Filetype[PDF - 526.93 KB]
  4. Occupational noise exposure; criteria for a recommended standard
    Personal Author:
    Chan, Henry S.
    Corporate Author:
    National Institute for Occupational Safety and Health, Division of Biomedical and Behavioral Science.; National Institute for Occupational Safety and Health, Education and Information Division.;
    Published:
    Rev. criteria, June 1998
    Series:
    DHHS publication ; no. (NIOSH) 98-126
    Description:
    "This criteria document reevaluates and reaffirms the recommended exposure limit (REL) for occupational noise exposure established by the National Institute for Occupational Safety and Health (NIOSH) in 1972. The REL is 85 decibels, A-weighted, ...
    Status:
    current
    File Type:
    Filetype[PDF - 5.65 MB]
  5. The effect of an insertion lubricant on the noise attenuation of foam earplugs
    Personal Author:
    Randolph, Robert F.; Kissell, Fred N.;
    Published:
    1/1/2008
    Description:
    Real-world levels of attenuation from hearing protection devices are usually much lower than the rated values obtained under near-ideal circumstances. The shortfall is even more extreme for earplugs than it is for earmuffs, primarily because of the c...
    File Type:
    Filetype[PDF - 122.31 KB]