Welcome to CDC stacks | Letter to the Editor: Preparation of respirable crystalline silica samples for subsequent analysis - 43327 | CDC Public Access
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Letter to the Editor: Preparation of respirable crystalline silica samples for subsequent analysis
Filetype[PDF-158.43 KB]


Details:
No Related Documents.
You May Also Like:
  1. Evaluation of lead and isocyanate exposure in a maintenance facility with small arms repair and vehicle painting shops
    Personal Author:
    Beaucham, Catherine C.; Page, Elena H.;
    Corporate Author:
    National Institute for Occupational Safety and Health.
    Published:
    January 2018
    Series:
    NIOSH health hazard evaluation report ; HHE 2016-0099-3297
    Description:
    "The Health Hazard Evaluation Program received a request from a small arms repair and vehicle maintenance facility. A manager was concerned about airborne lead and take-home lead exposures in the small arms repair shop as well as employees' exposures...
    File Type:
    Filetype[PDF - 1.80 MB]
  2. A comparison of respirable crystalline silica concentration measurements using a direct-on-filter Fourier transform infrared (FT-IR) transmission method vs. a traditional laboratory X-ray diffraction method
    Personal Author:
    Hart, Julie F.; Autenrieth, Daniel A.; Cauda, Emanuele; Chubb, Lauren; Spear, Terry M.; Wock, Siobhan; Rosenthal, Scott;
    Published:
    Oct 2018
    Source:
    J Occup Environ Hyg. 15(10):743-754
    Description:
    Evaluation and control of respirable crystalline silica (RCS) exposures are critical components of an effective mine industrial hygiene program. To provide more timely exposure data in the field, an end-of-shift Fourier transform infrared (FT-IR) spe...
    File Type:
    Filetype[PDF - 675.17 KB]
  3. Quartz Measurement in Coal Dust with High-Flow Rate Samplers: Laboratory Study
    Personal Author:
    LEE, TAEKHEE; LEE, EUN GYUNG; KIM, SEUNG WON; CHISHOLM, WILLIAM P.; KASHON, MICHAEL; HARPER, MARTIN;
    Published:
    Dec 19 2011
    Source:
    Ann Occup Hyg. 56(4):413-425.
    Description:
    A laboratory study was performed to measure quartz in coal dust using high-flow rate samplers (CIP10-R, GK2.69 cyclone, and FSP10 cyclone) and low-flow rate samplers [10-mm nylon and Higgins-Dewell type (BGI4L) cyclones] and to determine whether an i...
    File Type:
    Filetype[PDF - 398.03 KB]
  4. Assessment of Respirable Crystalline Silica Analysis Using Proficiency Analytical Testing Results from 2003–2013
    Personal Author:
    Harper, Martin; Sarkisian, Khatchatur; Andrew, Michael;
    Published:
    2014
    Source:
    J Occup Environ Hyg. 11(10):D157-D163
    Description:
    Analysis of Proficiency Analytical Testing (PAT) results between 2003 and 2013 suggest that the variation in respirable crystalline silica analysis is much smaller today than it was in the period 1990-1998, partly because of a change in sample produc...
    File Type:
    Filetype[PDF - 731.82 KB]
  5. Health effects of occupational exposure to respirable crystalline silica
    Personal Author:
    Baron, Paul A. (Paul Andrew), 1944-2009; Rice, Faye L.; Key-Schwartz, Rosa; Bartley, David; Schlecht, Paul;
    Corporate Author:
    National Institute for Occupational Safety and Health
    Published:
    April 2002
    Series:
    NIOSH hazard review
    DHHS publication ; no. (NIOSH) 2002-129
    Description:
    Occupational exposures to respirable crystalline silica are associated with the development of silicosis, lung cancer, pulmonary tuberculosis, and airways diseases. These exposures may also be related to the development of autoimmune disorders, chron...
    File Type:
    Filetype[PDF - 1.03 MB]