Implementing a New Personal Dust Monitor as an Engineering Tool

Details

• Personal Author:
  Dunham D ; Patashnick, Harvey ; Rupprecht E ; Thimons, Edward D. ; Volkwein, Jon C. ; Yanak C
• Description:
  A new personal respirable dust monitor developed by Rupprecht & Patashnick Co., Inc., in a multiyear project funded by NIOSH generated promising results in underground coal mine testing performed by NIOSH and industry representatives during the summer of 2003. The mine data showed that the personal dust monitor (PDM) performed similarly to co-located manual referenced samplers for full-shift samples at all four underground coal mines at which the evaluation took place. The technology that forms the heart of the PDM, called the tapered-element oscillating microbalance (TEOM system), is unique in its ability to collect suspended particles on a filter while simultaneously determining the accumulated mass with NIST traceability. Because the monitor measures the true particle mass collected on its filter, its results do not exhibit the same sensitivity to water spray as do optically based measurement approaches. The technique achieves microgram-level mass resolution even in the hostile mine environment and reports dust loading data on a continuous basis. Using the device, miners and mine operators have the ability to view both the cumulative and projected end-of-shift mass concentration values, as well as a short-term 15- or 30-min running average. During underground mine trials in the summer of 2003, technical personnel used the readings from the PDM to identify and correct several abnormal dust-generating scenarios. These events demonstrated the potential of the PDM to be used as an engineering tool to evaluate the effectiveness of various dust control strategies. In a separate evaluation by CONSOL Energy, Inc., the mine operator evaluated the benefit of a proposed new water spray-based dust control system. Engineers measured the dust concentration upstream and downstream of a production location under different dust control scenarios using two PDM units. By evaluating the change in the dust loading between the upstream and downstream monitoring sites, the company was able to determine in a few hours which hardware configuration would yield the greatest benefit to the workplace environment. [Description provided by NIOSH]
• Subjects:
  Coal Coal Mining Dust Mining Occupational Health Safety
• Keywords:
  Coal-miners Coal-mining Dust-exposure Dust-measurement Dust-particles Dust-samplers Dust-sampling Dusts Pneumoconiosis Respirable-dust Underground-miners Underground-mining

  More +
• Series:
  Mining Publications
• ISSN:
  0009-9910
• Document Type:
  Text
• Genre:
  Journal Article
• Place as Subject:
  OSHA Region 3 ; Pennsylvania
• CIO:
  National Institute for Occupational Safety and Health (NIOSH)
• Division:
  PRL - Pittsburgh Research Laboratory
• Topic:
  Workplace Safety & Health
• Location:
  North America
• Pages in Document:
  26-29
• Volume:
  109
• Issue:
  12
• NIOSHTIC Number:
  nn:20025830
• Citation:
  Coal Age 2004 Dec; 109(12):26-29
• Contact Point Address:
  NIOSH Pittsburgh Research Laboratory, P.O. Box 18070, Pittsburgh, PA 15236
• Federal Fiscal Year:
  2005
• NORA Priority Area:
  Research Tools and Approaches: Exposure Assessment Methods
• Peer Reviewed:
  False
• Source Full Name:
  Coal Age
• Collection(s):
  National Institute for Occupational Safety and Health
• Main Document Checksum:
  urn:sha-512:41f5d230555531b2e1bacf6d1c35316fd57cb6324f923b32b53d593047c4b6d4d808ed444d2f9b73452ab1587ca96839ec06e70d1f65c707e68b2949b2edfd7e
• Download URL:
  https://stacks.cdc.gov/view/cdc/220957/cdc_220957_DS1.pdf
• File Type:
  [PDF - 996.79 KB ]