Farmer Dies After Becoming Entangled In The Drive Mechanism Of A Snow Blower
-
1996/05/24
File Language:
English
Details
-
Corporate Authors:
-
Description:The victim was alone at the time that the incident occurred. This report is based on a review of a written sheriff's department report, and a review of their photos of the incident site. A 36-year-old farmer (victim) died after he became entangled in a tractor mounted snow blower. The two stage snow blower consisted of a horizontal auger and a multi-blade discharge fan. The horizontal auger extended the full width of the blower. It was driven by a horizontal shaft that extended from a gear box in the center of the blower to a drive sprocket on one side of the blower. The victim stopped the tractor near a farm building and dismounted from it. The tractor engine was left running and the power-take-off was not disengaged. The victim walked to an area near a drive chain and sprockets on the right side of the blower. While he was in the vicinity of the chain and sprockets, the right sleeve of his coveralls became entangled in one of the sprockets. He was pulled against the blower and was unable to free himself as his clothing wrapped around the shaft and sprocket. A neighbor discovered the victim entangled in the snow blower. He immediately stopped the tractor engine and called emergency personnel. They arrived shortly after being notified, removed the victim and pronounced him dead at the scene. MN FACE investigators concluded that to reduce the likelihood of similar occurrences, the following guidelines should be followed: 1. operators should disengage the power-take-off before dismounting from a tractor ; 2. operators should turn off the engine and remove the key before dismounting from a tractor ; and 3. operators should not wear loose-fitting clothing near operating machines.
-
Subjects:
-
Keywords:
- OSHA Region 5
- Accident-analysis
- Accident-prevention
- Accidents
- Injuries
- Injury-prevention
- Traumatic-injuries
- Work-operations
- Work-analysis
- Work-areas
- Work-performance
- Work-practices
- Safety-education
- Safety-equipment
- Safety-measures
- Safety-monitoring
- Protective-measures
- Farmers
- Agricultural-machinery
- Agricultural-workers
- Tractors
- Safety-clothing
- Equipment-operators
-
FACE - NIOSH and State:
-
Series:
-
Subseries:
-
DOI:
-
Document Type:
-
Funding:
-
Genre:
-
Place as Subject:
-
CIO:
-
Topic:
-
Location:
-
Pages in Document:1-4
-
NIOSHTIC Number:nn:20027521
-
NTIS Accession Number:PB2014-105068
-
Citation:Morgantown, WV: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, FACE 95MN068, 1996 May ; :1-4
-
Federal Fiscal Year:1996
-
Performing Organization:Minnesota Department of Health
-
Peer Reviewed:False
-
NAICS and SIC Codes:
-
Start Date:1991/09/30
-
End Date:2006/08/31
-
Resource Number:FACE-95MN068
-
Download URL:
-
File Type:
-
Collection(s):
-
Main Document Checksum:urn:sha-512:2dd3be29ff3bbd63975580d8545c66c996dc5ddcfc132f5479a1bfbd0833a55108f6c364c3f1d86fae6e9ee12e7eeda92a0f7a651bc738ca34d5f3f3a621288a
File Language:
English
CDC STACKS serves as an archival repository of CDC-published products including
scientific findings, journal articles, guidelines, recommendations, or other public health information authored or
co-authored by CDC or funded partners.
As a repository, CDC STACKS retains documents in their original published format to ensure public access to scientific information.
As a repository, CDC STACKS retains documents in their original published format to ensure public access to scientific information.
You May Also Like