Effect of fluoride inclusions on induction-slag-melted Ti-6A1-4V alloy
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All
i


Effect of fluoride inclusions on induction-slag-melted Ti-6A1-4V alloy

Filetype[PDF-5.26 MB]


Select the Download button to view the document
This document is over 5mb in size and cannot be previewed
  • English

  • Details:

    • Description:
      "The effect of fluoride inclusions on the properties of titanium produced from the Bureau of Mines developed induction slag melting process is of concern to members of the titanium industry. The objective of the research was to determine the effect of caf2 inclusions on the properties of titanium and its survival rate during melting. The data were obtained from single-induction-slag- melted ingots prepared with the normal addition of 4 pct and also with 2- and 1-pct additions of caf2 slag. The results of this effort showed that the mechanical properties of single-induction- slag-melted ti-6a1-4v alloy exceed the minimum values specified in aerospace materials specification for titanium alloy bars and forgings ams4928h, but these materials are much more notch sensitive in fatigue than normal ti-6a1-4v alloy titanium. First and second vacuum-arc remelts of single-induction-slag-melted ingots fragmented and increased the number of inclusions, while reductions in the amount of flux resulted in an upward trend in the spatial distance between pores in an x-y plane." - NIOSHTIC-2 NIOSHTIC no. 10006002
    • Document Type:
    • Main Document Checksum:
    • File Type:

    Supporting Files

    • No Additional Files

    More +

    You May Also Like

    Checkout today's featured content at stacks.cdc.gov