Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
i


Control of airborne respirable dust in the face area with water sprays using a full-scale laboratory model
Filetype[PDF-6.56 MB]


This document cannot be previewed automatically as it exceeds 5 MB
Please click the thumbnail image to view the document.
Control of airborne respirable dust in the face area with water sprays using a full-scale laboratory model
Details:
  • Description:
    "This report presents the results of a Bureau of Mines laboratory investigation of the effect of water sprays in reducing respirable dust that escaped the face area of a full-scale wooden model of a mine entry containing a wooden model of a ripper-type continuous mining machine and exhaust brattice. Areas examined were (1) the general effectiveness of a low-pressure water spray system mounted on top of the mining machine boom, a high-pressure spray system mounted under the boom, and the combined top- and bottom-spray systems, and (2) the effect of these three spray systems on the capture of coal dust particles of different sizes. Dust was injected into a sump cavity at the face. Airborne respirable dust concentration was measured behind the brattice with a personal sampler and cyclone, and particle size distribution was measured with a cascade impactor. When used alone, the top-spray system captured about 55 pct of the respirable dust in the face area and the bottom-spray system captured 60 pct; the capture efficiency of each system is decreased when they are used simultaneously. From a mass-concentration viewpoint, each spray system preferentially captures larger dust particles." - NIOSHTIC-2 NIOSHTIC no. 10006209
  • Document Type:
  • Main Document Checksum:
  • File Type:
  • Supporting Files:
    No Additional Files
No Related Documents.

You May Also Like: