Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.

Search our Collections & Repository

All these words:

For very narrow results

This exact word or phrase:

When looking for a specific result

Any of these words:

Best used for discovery & interchangable words

None of these words:

Recommended to be used in conjunction with other fields

Language:

Dates

Publication Date Range:

to

Document Data

Title:

Document Type:

Library

Collection:

Series:

People

Author:

Help
Clear All

Query Builder

Query box

Help
Clear All

For additional assistance using the Custom Query please check out our Help Page

i

Use of seismic tomography to identify geologic hazards in underground mines

Filetype[PDF-40.34 KB]


  • English
    • Details You May Also Like

    Details:

    • Corporate Authors:
      National Institute for Occupational Safety and Health.
    • Description:
      "The use of seismic tomography to identify geologic hazards in underground mines was discussed. Problems associated with determining the amounts of relative stress in large rock pillars in deep underground mines were summarized. No adequate method for determining these types of stressors currently exists. Existing methods for determining geological stress are time consuming and expensive and can only be used in localized areas and frequently produce data of limited quality. Seismic tomography as applied to determining stress is based on the principle that P-wave velocities in highly stressed rock will be relatively higher than in rock under less strain. Seismic tomography involves generating seismic waves that penetrate rock masses. Measurements of the apparent velocities of the P-waves can be used to construct stress gradient contours (tomograms). The method involves striking a source location with a 4.5 kilogram sledge hammer that has been fitted with a trigger connected to a seismograph and then recording the first arrival of the seismic wave at stations where receivers (geophones) are located. Each geophone is linked to a seismic cable connected to a signal stacking seismograph. The seismograph records all P-wave arrivals. All P-wave data are transferred from the seismograph to a personal computer which produces tomograms with the aid of the software program 3DTOM. The results of seismic tests conducted by the Spokane, Washington, Research Laboratory (SRL) were discussed. SRL personnel have conducted seismic tomography surveys at three deep underground mines. Areas of high stress in the mapped rock masses could be correlated with later seismic activity, rock bursts, and major ground falls. In all three surveys, low P-wave velocity areas corresponded with fractured rock and mine openings. High velocity areas were found to correspond to unmined pillars above stopes, corners of pillars, and known areas of high stress. It was concluded that seismic tomography represents a reliable, cost effective and efficient method for evaluating stress in large rock masses and monitoring stress in pillars during mining cycles." - NIOSHTIC-2

      NIOSHTIC no. 00241857

    • Series:
      Technology news (National Institute for Occupational Safety and Health) ; 466
    • Document Type:
      Newsletter
    • Collection(s):
    • Main Document Checksum:
    • Download URL:
    • File Type:

    Supporting Files

    • No Additional Files

    More +

    You May Also Like

    Checkout today's featured content at stacks.cdc.gov