Welcome to CDC stacks | Evaluation of Cut-resistant Sleeves and Possible Fiberglass Fiber Shedding at a Steel Mill - 32699 | CDC Public Access
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Evaluation of Cut-resistant Sleeves and Possible Fiberglass Fiber Shedding at a Steel Mill
Filetype[PDF-1.42 MB]


No Related Documents.
You May Also Like:
  1. Industrial noise control manual
    Personal Author:
    Jensen, Paul, 1951-; Jokel, Charles R.; Miller, Laymon N.;
    Corporate Author:
    National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering.
    Published:
    Rev. ed. 1978
    Series:
    NIOSH technical report
    DHEW publication ; no. (NIOSH) 79-117
    Description:
    "Basic information on understanding, measuring, and controlling industrial noise is presented, along with descriptions of 61 industrial noise control projects. Noise problem analysis, basic methods of noise control, acoustical materials, and the choi...
    File Type:
    Filetype[PDF - 8.32 MB]
  2. Implementing Infrared Determination Of Quartz Particulates On Novel Filters For A Prototype Dust Monitor
    Personal Author:
    Tuchman, Donald P.; Volkwein, Jon C.; Vinson, Robert P.;
    Published:
    0/1/1900
    Description:
    Research by the National Institute for Occupational Safety and Health (NIOSH) has pursued quartz analysis for the specialized ?lter assemblies of a new worker-wearable personal dust monitor (PDM). The PDM is a real-time instrument utilizing a tapered...
    File Type:
    Filetype[PDF - 339.85 KB]
  3. Effects of selected physical agents on the performance of acoustically absorptive materials
    Personal Author:
    Burks, J. Alton.; Ruhe, Thomas C.; Spencer, Ellsworth R.;
    Corporate Author:
    United States. Bureau of Mines.
    Published:
    1990
    Series:
    Report of investigations (United States. Bureau of Mines) ; 9298
    Description:
    "When acoustical materials are used in a mining environment for noise control purposes, they are subject to environmental deterioration from hydraulic fluid, moisture, and dust. These and other factors can cause physical degradation of the material, ...
    File Type:
    Filetype[PDF - 15.76 MB]
  4. Occupational and Environmental Bronchiolar Disorders
    Personal Author:
    Cummings, Kristin J.; Kreiss, Kathleen;
    Published:
    May 29 2015
    Source:
    Semin Respir Crit Care Med. 36(3):366-378.
    Description:
    Occupational and environmental causes of bronchiolar disorders are recognized on the basis of case reports, case series, and, less commonly, epidemiologic investigations. Pathology may be limited to the bronchioles or also involve other components of...
    File Type:
    Filetype[PDF - 1.57 MB]
  5. A Noise Control For A Roof Bolting Machine: Collapsible Drill Steel Enclosure
    Personal Author:
    Matetic, Rudy J.; Kovalchik, Peter G.; Peterson, J. Shawn; Alcorn, Lynn A;
    Published:
    1/1/2008
    Description:
    The National Institute for Occupational Safety and Health (NIOSH) at the Pittsburgh Research Laboratory (PRL) is conducting research to reduce the noise exposures of roof bolting machine operators and to prevent additional cases of Noise Induced Hear...
    File Type:
    Filetype[PDF - 458.85 KB]