- gsearch

Note: Javascript is disabled or is not supported by your browser. For this reason, some items on this page will be unavailable. For more information about this message, please visit this page: About CDC.gov

Advanced Search

- gsearch

Search Results

Narrow Results:

2014 1
2013 5
2012 2
2011 3
2010 1
2006 1
1997 1
1990 2
1989 1
1986 2
1984 1
1983 1
1982 3
1976 1

Text 25

1 - 20 of 25 Results

Refine Results

All Collections

Refine Results:

All Collections

Previous

1 2

Willsboro, New York

CITE Title : Willsboro, New York Personal Author(s) : Hanke, Wojciech E. Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1983/01/01 Pages in Document : 25 pdf pages Series : Health Hazard Evaluation Reports (HHE) DOI : https://doi.org/10.26616/NIOSHMHETA81112 Hanke, Wojciech E. (1983). Willsboro, New York. https://doi.org/10.26616/NIOSHMHETA81112 Hanke, Wojciech E. "Willsboro, New York" (1983), https://doi.org/10.26616/NIOSHMHETA81112 Hanke, Wojciech E. "Willsboro, New York" , 1983, https://doi.org/10.26616/NIOSHMHETA81112 Export RIS Citation Information.

:

Hanke, Wojciech E.

1983/01/01 | Health Hazard Evaluation Reports (HHE)

:

In 1976, NIOSH performed a health hazard evaluation at a wollastonite mine and mill in Willsboro, New York. A second NIOSH medical-epidemiological eva...
Health Hazard Evaluation Report: HETA 93-0797-2624: Nicks Silica Company, Jackson, Tennessee

CITE Title : Health Hazard Evaluation Report: HETA 93-0797-2624: Nicks Silica Company, Jackson, Tennessee Personal Author(s) : Filios, Margaret S. Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1997/01/01 Pages in Document : 36 pdf pages Series : Health Hazard Evaluation Reports (HHE) DOI : https://doi.org/10.26616/NIOSHHETA9307972624 Filios, Margaret S. (1997). Health Hazard Evaluation Report: HETA 93-0797-2624: Nicks Silica Company, Jackson, Tennessee. https://doi.org/10.26616/NIOSHHETA9307972624 Filios, Margaret S. "Health Hazard Evaluation Report: HETA 93-0797-2624: Nicks Silica Company, Jackson, Tennessee" (1997), https://doi.org/10.26616/NIOSHHETA9307972624 Filios, Margaret S. "Health Hazard Evaluation Report: HETA 93-0797-2624: Nicks Silica Company, Jackson, Tennessee" , 1997, https://doi.org/10.26616/NIOSHHETA9307972624 Export RIS Citation Information.

:

Filios, Margaret S.

1997/01/01 | Health Hazard Evaluation Reports (HHE)

:

In response to a request from the Mine Safety and Health Administration, an investigation was begun into the prevalence of silicosis at specific groun...
Houlton, Maine

CITE Title : Houlton, Maine Personal Author(s) : Hills, Bruce W. Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1990/04/01 Pages in Document : 16 pdf pages Series : Health Hazard Evaluation Reports (HHE) DOI : https://doi.org/10.26616/NIOSHHETA883362038 Hills, Bruce W. (1990). Houlton, Maine. https://doi.org/10.26616/NIOSHHETA883362038 Hills, Bruce W. "Houlton, Maine" (1990), https://doi.org/10.26616/NIOSHHETA883362038 Hills, Bruce W. "Houlton, Maine" , 1990, https://doi.org/10.26616/NIOSHHETA883362038 Export RIS Citation Information.

:

Hills, Bruce W.

1990/04/01 | Health Hazard Evaluation Reports (HHE)

:

In response to a request from the American Federation of Grain Millers, a study was made of exposures to propylene-oxide (75569), starch dust, phospho...
Island Falls, Maine

CITE Title : Island Falls, Maine Personal Author(s) : Hills, Bruce W. Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1990/06/01 Pages in Document : 13 pdf pages Series : Health Hazard Evaluation Reports (HHE) DOI : https://doi.org/10.26616/NIOSHHETA883402048 Hills, Bruce W. (1990). Island Falls, Maine. https://doi.org/10.26616/NIOSHHETA883402048 Hills, Bruce W. "Island Falls, Maine" (1990), https://doi.org/10.26616/NIOSHHETA883402048 Hills, Bruce W. "Island Falls, Maine" , 1990, https://doi.org/10.26616/NIOSHHETA883402048 Export RIS Citation Information.

:

Hills, Bruce W.

1990/06/01 | Health Hazard Evaluation Reports (HHE)

:

In response to a request from the American Federation of Grain Millers an evaluation was made of exposures to propylene-oxide (75569), starch dust, ph...
In-Depth Survey Report: Engineering Control and Process Evaluation at Quaker Oats

CITE Title : In-Depth Survey Report: Engineering Control and Process Evaluation at Quaker Oats Personal Author(s) : Curwin, Brian D.;Garcia, Alberto;Hirst, Deborah V. L.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2012/04/01 Pages in Document : 1-34 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB32214a Curwin, Brian D. et al. (2012). In-Depth Survey Report: Engineering Control and Process Evaluation at Quaker Oats. https://doi.org/10.26616/NIOSHEPHB32214a Curwin, Brian D. and Garcia, Alberto and Hirst, Deborah V. L. "In-Depth Survey Report: Engineering Control and Process Evaluation at Quaker Oats" (2012), https://doi.org/10.26616/NIOSHEPHB32214a Curwin, Brian D. et al. "In-Depth Survey Report: Engineering Control and Process Evaluation at Quaker Oats" , 2012, https://doi.org/10.26616/NIOSHEPHB32214a Export RIS Citation Information.

:

Curwin, Brian D. ;

Garcia, Alberto

2012/04/01 | Engineering and Physical Hazards Survey Reports

:

Researchers from the Centers for Disease Control and Prevention (CDC), National Institute for Occupational Safety and Health (NIOSH) conducted an engi...
Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1982]

CITE Title : Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1982] Personal Author(s) : Amendola, Alfred A.;Caplan, Paul E.;Cooper, Thomas C.;Reed, Laurence D.; Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1982/06/01 Pages in Document : 1-60 URL : https://stacks.cdc.gov/view/cdc/175565 Amendola, Alfred A. et al. (1982). Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1982]. Amendola, Alfred A. et al. "Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1982]" (1982) Amendola, Alfred A. et al. "Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1982]" , 1982 Export RIS Citation Information.

:

Amendola, Alfred A. ;

Caplan, Paul E.

1982/06/01 | National Institute for Occupational Safety and Health (NIOSH)

:

ontrol technology assessment was conducted in three silica flour mills (SIC-0723) to evaluate existing control technology procedures, and new and inno...
Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1984]

CITE Title : Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1984] Personal Author(s) : Amendola, Alfred A.;Caplan, Paul E.;Cooper, Thomas C.;Reed, Laurence D.; Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1984/10/01 Pages in Document : 1-51 Series : NIOSH Numbered Publications DOI : https://doi.org/10.26616/NIOSHPUB84110 Amendola, Alfred A. et al. (1984). Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1984]. https://doi.org/10.26616/NIOSHPUB84110 Amendola, Alfred A. et al. "Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1984]" (1984), https://doi.org/10.26616/NIOSHPUB84110 Amendola, Alfred A. et al. "Health Hazard Control Technology Assessment of the Silica Flour Milling Industry [1984]" , 1984, https://doi.org/10.26616/NIOSHPUB84110 Export RIS Citation Information.

:

Amendola, Alfred A. ;

Caplan, Paul E.

1984/10/01 | NIOSH Numbered Publications

:

ontrol technology assessment was conducted in three silica flour mills (SIC-0723) to evaluate existing control technology procedures, and new and inno...
In-Depth Survey Report: Dust-Control Technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin

CITE Title : In-Depth Survey Report: Dust-Control Technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin Personal Author(s) : Blade, Leo M.;Cecala, Andrew B.;Chekan, Gregory J.;Hammond, Duane R.;Joy, Gerald J.;Lo, Li-Ming;Shulman, Stanley A.;Zimmer, Jeanne A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2011/12/01 Pages in Document : 1-26 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28218a Blade, Leo M. et al. (2011). In-Depth Survey Report: Dust-Control Technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin. https://doi.org/10.26616/NIOSHEPHB28218a Blade, Leo M. et al. "In-Depth Survey Report: Dust-Control Technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin" (2011), https://doi.org/10.26616/NIOSHEPHB28218a Blade, Leo M. et al. "In-Depth Survey Report: Dust-Control Technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin" , 2011, https://doi.org/10.26616/NIOSHEPHB28218a Export RIS Citation Information.

:

Blade, Leo M. ;

Cecala, Andrew B.

2011/12/01 | Engineering and Physical Hazards Survey Reports

:

In 2010, NIOSH researchers and the Silica/Milling-Machines Partnership coordinated by the National Asphalt Pavement Association (NAPA), evaluated dust...
In-Depth Survey Report: A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin

CITE Title : In-Depth Survey Report: A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin Personal Author(s) : Hammond, Duane R.;Shulman, Stanley A.;Trifonoff, Nick; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2011/09/01 Pages in Document : 1-16 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28219a Hammond, Duane R. et al. (2011). In-Depth Survey Report: A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin. https://doi.org/10.26616/NIOSHEPHB28219a Hammond, Duane R. and Shulman, Stanley A. and Trifonoff, Nick "In-Depth Survey Report: A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin" (2011), https://doi.org/10.26616/NIOSHEPHB28219a Hammond, Duane R. et al. "In-Depth Survey Report: A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin" , 2011, https://doi.org/10.26616/NIOSHEPHB28219a Export RIS Citation Information.

:

Hammond, Duane R. ;

Shulman, Stanley A.

2011/09/01 | Engineering and Physical Hazards Survey Reports

:

In August 2011, NIOSH researchers and the Silica/Milling-Machines Partnership coordinated by the National Asphalt Pavement Association (NAPA) conducte...
In-Depth Survey Report: Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System

CITE Title : In-Depth Survey Report: Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System Personal Author(s) : Hammond, Duane R.;Hein, Misty J.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2014/09/01 Pages in Document : 1-31 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28226a Hammond, Duane R. et al. (2014). In-Depth Survey Report: Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System. https://doi.org/10.26616/NIOSHEPHB28226a Hammond, Duane R. and Hein, Misty J. and Shulman, Stanley A. "In-Depth Survey Report: Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System" (2014), https://doi.org/10.26616/NIOSHEPHB28226a Hammond, Duane R. et al. "In-Depth Survey Report: Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System" , 2014, https://doi.org/10.26616/NIOSHEPHB28226a Export RIS Citation Information.

:

Hammond, Duane R. ;

Hein, Misty J.

2014/09/01 | Engineering and Physical Hazards Survey Reports

:

Between July 23rd and September 25th, 2013, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines ...
In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System

CITE Title : In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System Personal Author(s) : Hammond, Duane R.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/07/01 Pages in Document : 1-19 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. (2013). In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System. https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System" (2013), https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System" , 2013, https://doi.org/10.26616/NIOSHEPHB28225a Export RIS Citation Information.

:

Hammond, Duane R. ;

Shulman, Stanley A.

2013/07/01 | Engineering and Physical Hazards Survey Reports

:

Between September 18th and October 13th, 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machin...
In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System

CITE Title : In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System Personal Author(s) : Hammond, Duane R.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/05/01 Pages in Document : 1-19 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. (2013). In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System. https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System" (2013), https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System" , 2013, https://doi.org/10.26616/NIOSHEPHB28223a Export RIS Citation Information.

:

Hammond, Duane R. ;

Shulman, Stanley A.

2013/05/01 | Engineering and Physical Hazards Survey Reports

:

From June through August 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership c...
In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling

CITE Title : In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling Personal Author(s) : Hammond, Duane R.;Kovein, Ronald J.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/05/01 Pages in Document : 1-16 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. et al. (2013). In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling. https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. and Kovein, Ronald J. and Shulman, Stanley A. "In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling" (2013), https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. et al. "In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling" , 2013, https://doi.org/10.26616/NIOSHEPHB28224a Export RIS Citation Information.

:

Hammond, Duane R. ;

Kovein, Ronald J.

2013/05/01 | Engineering and Physical Hazards Survey Reports

:

From August 17-18, 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership coordin...
In-Depth Survey Report: A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma

CITE Title : In-Depth Survey Report: A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma Personal Author(s) : Hammond, Duane R.;Mead, Kenneth R.;Shulman, Stanley A.;Trifonoff, Nick; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2011/12/01 Pages in Document : 1-18 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28220a Hammond, Duane R. et al. (2011). In-Depth Survey Report: A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma. https://doi.org/10.26616/NIOSHEPHB28220a Hammond, Duane R. et al. "In-Depth Survey Report: A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma" (2011), https://doi.org/10.26616/NIOSHEPHB28220a Hammond, Duane R. et al. "In-Depth Survey Report: A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma" , 2011, https://doi.org/10.26616/NIOSHEPHB28220a Export RIS Citation Information.

:

Hammond, Duane R. ;

Mead, Kenneth R.

2011/12/01 | Engineering and Physical Hazards Survey Reports

:

In August 2011, NIOSH researchers and the Silica/Milling-Machines Partnership coordinated by the National Asphalt Pavement Association (NAPA) conducte...
In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee

CITE Title : In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee Personal Author(s) : Garcia, Alberto;Hammond, Duane R.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/02/01 Pages in Document : 1-14 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28221a Garcia, Alberto et al. (2013). In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee. https://doi.org/10.26616/NIOSHEPHB28221a Garcia, Alberto and Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee" (2013), https://doi.org/10.26616/NIOSHEPHB28221a Garcia, Alberto et al. "In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee" , 2013, https://doi.org/10.26616/NIOSHEPHB28221a Export RIS Citation Information.

:

Garcia, Alberto ;

Hammond, Duane R.

2013/02/01 | Engineering and Physical Hazards Survey Reports

:

In April 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership coordinated by th...
In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota

CITE Title : In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota Personal Author(s) : Garcia, Alberto;Hammond, Duane R.;Henn, Scott;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2012/11/01 Pages in Document : 1-12 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28222a Garcia, Alberto et al. (2012). In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota. https://doi.org/10.26616/NIOSHEPHB28222a Garcia, Alberto et al. "In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota" (2012), https://doi.org/10.26616/NIOSHEPHB28222a Garcia, Alberto et al. "In-Depth Survey Report: A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota" , 2012, https://doi.org/10.26616/NIOSHEPHB28222a Export RIS Citation Information.

:

Garcia, Alberto ;

Hammond, Duane R.

2012/11/01 | Engineering and Physical Hazards Survey Reports

:

In August 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership coordinated by t...
Golden, Colorado

CITE Title : Golden, Colorado Personal Author(s) : Gunter, Bobby J.;Thoburn, Theodore W.; Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1986/05/01 Pages in Document : 30 pdf pages Series : Health Hazard Evaluation Reports (HHE) DOI : https://doi.org/10.26616/NIOSHHETA845101691 Gunter, Bobby J. and Thoburn, Theodore W. (1986). Golden, Colorado. https://doi.org/10.26616/NIOSHHETA845101691 Gunter, Bobby J. and Thoburn, Theodore W. "Golden, Colorado" (1986), https://doi.org/10.26616/NIOSHHETA845101691 Gunter, Bobby J. and Thoburn, Theodore W. "Golden, Colorado" , 1986, https://doi.org/10.26616/NIOSHHETA845101691 Export RIS Citation Information.

:

Gunter, Bobby J. ;

Thoburn, Theodore W.

1986/05/01 | Health Hazard Evaluation Reports (HHE)

:

The United Steelworkers of America Local 8031 requested an evaluation of worker exposure to beryllium (7440417) at the Rocky Flats Facility (SIC-9711)...
Machinist Dies When He Came Into Contact With a Rotating Vertical Cutting Head of a Gantry Mill

CITE Title : Machinist Dies When He Came Into Contact With a Rotating Vertical Cutting Head of a Gantry Mill Corporate Authors(s) : Michigan Fatality Assessment and Control Evaluation (Project) (MIFACE);Michigan State University. Department of Medicine. Occupational and Environmental Medicine; Published Date : 2010/01/28 Pages in Document : 1-10 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE08MI062 Michigan Fatality Assessment and Control Evaluation (Project) (MIFACE) (2010). Machinist Dies When He Came Into Contact With a Rotating Vertical Cutting Head of a Gantry Mill. https://doi.org/10.26616/NIOSHSFACE08MI062 Michigan Fatality Assessment and Control Evaluation (Project) (MIFACE) "Machinist Dies When He Came Into Contact With a Rotating Vertical Cutting Head of a Gantry Mill" (2010), https://doi.org/10.26616/NIOSHSFACE08MI062 Michigan Fatality Assessment and Control Evaluation (Project) (MIFACE) "Machinist Dies When He Came Into Contact With a Rotating Vertical Cutting Head of a Gantry Mill" , 2010, https://doi.org/10.26616/NIOSHSFACE08MI062 Export RIS Citation Information.

:

Michigan Fatality Assessment and Control Evaluation (Project) (MIFACE) ...

2010/01/28 | Fatality Assessment and Control Evaluation Reports (FACE)

:

In the summer of 2008, a 48-year-old male machinist died when he came into contact with a rotating vertical cutting head of a gantry mill. The deceden...
Millwright fatality involving a hydraulic accumulator

CITE Title : Millwright fatality involving a hydraulic accumulator Corporate Authors(s) : Oregon Fatality Assessment and Control Evaluation (Program) (OR-FACE);Oregon Health & Science University. Oregon Institute of Occupational Health Sciences; Published Date : 2013/11/01 Pages in Document : 1-7 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE11OR016 Oregon Fatality Assessment and Control Evaluation (Program) (OR-FACE) (2013). Millwright fatality involving a hydraulic accumulator. https://doi.org/10.26616/NIOSHSFACE11OR016 Oregon Fatality Assessment and Control Evaluation (Program) (OR-FACE) "Millwright fatality involving a hydraulic accumulator" (2013), https://doi.org/10.26616/NIOSHSFACE11OR016 Oregon Fatality Assessment and Control Evaluation (Program) (OR-FACE) "Millwright fatality involving a hydraulic accumulator" , 2013, https://doi.org/10.26616/NIOSHSFACE11OR016 Export RIS Citation Information.

:

Oregon Fatality Assessment and Control Evaluation (Program) (OR-FACE) ...

2013/11/01 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 61-year-old senior millwright with over 32 years of experience was killed, and 2 other millwrights were injured, while trying to disassemble a hydra...
Worker Electrocuted in South Carolina

CITE Title : Worker Electrocuted in South Carolina Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 1986/12/09 Pages in Document : 3 pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHFACE8718 National Institute for Occupational Safety and Health (1986). Worker Electrocuted in South Carolina. https://doi.org/10.26616/NIOSHFACE8718 National Institute for Occupational Safety and Health "Worker Electrocuted in South Carolina" (1986), https://doi.org/10.26616/NIOSHFACE8718 National Institute for Occupational Safety and Health "Worker Electrocuted in South Carolina" , 1986, https://doi.org/10.26616/NIOSHFACE8718 Export RIS Citation Information.

:

National Institute for Occupational Safety and Health

1986/12/09 | Fatality Assessment and Control Evaluation Reports (FACE)

:

While steam cleaning a rubber mill, a worker suffered electrocution. The on/off switch on the mill was not watertight and steam entered the switch, co...

1 - 20 / 25

Previous

1 2