The Community Guide

- gsearch

Search Results

Narrow Results:

Health Evaluation and Technical Assistance (HETA) 8
NIOSH (In-House) 15
State 147

Text 192

Abstract 2
Conference/Symposia Proceedings 1
Fatality Assessment and Control Evaluation 1
Field Studies 1
Field Study 187
Other 1
Report 1

21 - 40 of 192 Results

Refine Results

Refine Results:

Previous 1 2 3 4 ... 10

In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System

CITE Title : In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System Personal Author(s) : Hammond, Duane R.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/07/01 Pages in Document : 1-19 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. (2013). In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System. https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System" (2013), https://doi.org/10.26616/NIOSHEPHB28225a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System" , 2013, https://doi.org/10.26616/NIOSHEPHB28225a Export RIS Citation Information.

:

Hammond, Duane R. ;

Shulman, Stanley A.

2013/07/01 | Engineering and Physical Hazards Survey Reports

:

Between September 18th and October 13th, 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machin...
In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System

CITE Title : In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System Personal Author(s) : Hammond, Duane R.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/05/01 Pages in Document : 1-19 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. (2013). In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System. https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System" (2013), https://doi.org/10.26616/NIOSHEPHB28223a Hammond, Duane R. and Shulman, Stanley A. "In-Depth Survey Report: Control Technology for Respirable Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System" , 2013, https://doi.org/10.26616/NIOSHEPHB28223a Export RIS Citation Information.

:

Hammond, Duane R. ;

Shulman, Stanley A.

2013/05/01 | Engineering and Physical Hazards Survey Reports

:

From June through August 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership c...
In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling

CITE Title : In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling Personal Author(s) : Hammond, Duane R.;Kovein, Ronald J.;Shulman, Stanley A.; Corporate Authors(s) : National Institute for Occupational Safety and Health. Division of Applied Research and Technology Published Date : 2013/05/01 Pages in Document : 1-16 Series : Engineering and Physical Hazards Survey Reports DOI : https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. et al. (2013). In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling. https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. and Kovein, Ronald J. and Shulman, Stanley A. "In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling" (2013), https://doi.org/10.26616/NIOSHEPHB28224a Hammond, Duane R. et al. "In-Depth Survey Report: Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling" , 2013, https://doi.org/10.26616/NIOSHEPHB28224a Export RIS Citation Information.

:

Hammond, Duane R. ;

Kovein, Ronald J.

2013/05/01 | Engineering and Physical Hazards Survey Reports

:

From August 17-18, 2012, National Institute for Occupational Safety and Health (NIOSH) researchers and the Silica/Milling-Machines Partnership coordin...
Evaluation of Ventilation in Aircraft Maintenance and Restoration Hangars

CITE Title : Evaluation of Ventilation in Aircraft Maintenance and Restoration Hangars Personal Author(s) : Bennett, James S.;Methner, Mark M.; Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 2015/10/01 Pages in Document : 22 pdf pages Series : Health Hazard Evaluation Reports (HHE) Source : Cincinnati, OH: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, HHE 2014-0067-3243, 2015 Oct;:1-17; DOI : https://doi.org/10.26616/NIOSHHHE201400673243 Bennett, James S. and Methner, Mark M. (2015). Evaluation of Ventilation in Aircraft Maintenance and Restoration Hangars. https://doi.org/10.26616/NIOSHHHE201400673243 Bennett, James S. and Methner, Mark M. "Evaluation of Ventilation in Aircraft Maintenance and Restoration Hangars" (2015), https://doi.org/10.26616/NIOSHHHE201400673243 Bennett, James S. and Methner, Mark M. "Evaluation of Ventilation in Aircraft Maintenance and Restoration Hangars" , 2015, https://doi.org/10.26616/NIOSHHHE201400673243 Export RIS Citation Information.

:

Bennett, James S. ;

Methner, Mark M.

2015/10/01 | Health Hazard Evaluation Reports (HHE)

:

The Health Hazard Evaluation Program received a request from managers regarding ventilation in four hangars used to maintain, repair, and restore acti...
Evaluation of Exposures in Sculpture Studios at a College Art Department

CITE Title : Evaluation of Exposures in Sculpture Studios at a College Art Department Personal Author(s) : Chen, Lilia;Tapp, Loren C.; Corporate Authors(s) : National Institute for Occupational Safety and Health Published Date : 2009/02/01 Pages in Document : 32 pdf pages Series : Health Hazard Evaluation Reports (HHE) Source : Cincinnati, OH: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, HETA 2007-0167-3078, 2009 Feb;:1-23; DOI : https://doi.org/10.26616/NIOSHHETA200701673078 Chen, Lilia and Tapp, Loren C. (2009). Evaluation of Exposures in Sculpture Studios at a College Art Department. https://doi.org/10.26616/NIOSHHETA200701673078 Chen, Lilia and Tapp, Loren C. "Evaluation of Exposures in Sculpture Studios at a College Art Department" (2009), https://doi.org/10.26616/NIOSHHETA200701673078 Chen, Lilia and Tapp, Loren C. "Evaluation of Exposures in Sculpture Studios at a College Art Department" , 2009, https://doi.org/10.26616/NIOSHHETA200701673078 Export RIS Citation Information.

:

Chen, Lilia ;

Tapp, Loren C.

2009/02/01 | Health Hazard Evaluation Reports (HHE)

:

NIOSH received a confidential employee request for an HHE at Brooklyn College in Brooklyn, New York. The request was to investigate health and safety ...
Tree Excavator Killed Using Skid-Steer Loader and Tree Shear Attachment

CITE Title : Tree Excavator Killed Using Skid-Steer Loader and Tree Shear Attachment Personal Author(s) : Johnson, Wayne;Rautiainen, Risto; Corporate Authors(s) : Iowa Fatality Assessment & Control Evaluation Program (Iowa FACE);University of Iowa. College of Public Health. Department of Occupational and Environmental Health; Published Date : 2003/01/28 Pages in Document : 6 pdf pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE01IA042 Johnson, Wayne and Rautiainen, Risto (2003). Tree Excavator Killed Using Skid-Steer Loader and Tree Shear Attachment. https://doi.org/10.26616/NIOSHSFACE01IA042 Johnson, Wayne and Rautiainen, Risto "Tree Excavator Killed Using Skid-Steer Loader and Tree Shear Attachment" (2003), https://doi.org/10.26616/NIOSHSFACE01IA042 Johnson, Wayne and Rautiainen, Risto "Tree Excavator Killed Using Skid-Steer Loader and Tree Shear Attachment" , 2003, https://doi.org/10.26616/NIOSHSFACE01IA042 Export RIS Citation Information.

:

Johnson, Wayne ;

Rautiainen, Risto

2003/01/28 | Fatality Assessment and Control Evaluation Reports (FACE)

:

In the winter of 2001, a 25-year-old self-employed tree excavator was fatally injured while using a skid-steer loader equipped with a tree shear attac...
Paper mill employee killed as winder safety plate pins him against a beam.

CITE Title : Paper mill employee killed as winder safety plate pins him against a beam. Personal Author(s) : Etre, Lois A.;Johnson, Wayne; Corporate Authors(s) : Iowa Fatality Assessment & Control Evaluation Program (Iowa FACE);University of Iowa. College of Medicine. Institute for Rural and Environmental Health; Published Date : 1999/04/06 Pages in Document : 5 pdf pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE98IA003 Etre, Lois A. and Johnson, Wayne (1999). Paper mill employee killed as winder safety plate pins him against a beam.. https://doi.org/10.26616/NIOSHSFACE98IA003 Etre, Lois A. and Johnson, Wayne "Paper mill employee killed as winder safety plate pins him against a beam." (1999), https://doi.org/10.26616/NIOSHSFACE98IA003 Etre, Lois A. and Johnson, Wayne "Paper mill employee killed as winder safety plate pins him against a beam." , 1999, https://doi.org/10.26616/NIOSHSFACE98IA003 Export RIS Citation Information.

:

Etre, Lois A. ;

Johnson, Wayne

1999/04/06 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On February 9, 1998, a 40-year-old male employee died while working at a paper mill. The employee was working at the winder station. The winder statio...
Worker Dies After Being Crushed By A Soft Drink Palletizer Lift

CITE Title : Worker Dies After Being Crushed By A Soft Drink Palletizer Lift Personal Author(s) : Brown, Margee;Parker, David L.; Corporate Authors(s) : Minnesota Fatality Assessment & Control Evaluation Program (MN FACE);Minnesota. Department of Health; Published Date : 1996/07/09 Pages in Document : 1-7 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE96MN028 Brown, Margee and Parker, David L. (1996). Worker Dies After Being Crushed By A Soft Drink Palletizer Lift. https://doi.org/10.26616/NIOSHSFACE96MN028 Brown, Margee and Parker, David L. "Worker Dies After Being Crushed By A Soft Drink Palletizer Lift" (1996), https://doi.org/10.26616/NIOSHSFACE96MN028 Brown, Margee and Parker, David L. "Worker Dies After Being Crushed By A Soft Drink Palletizer Lift" , 1996, https://doi.org/10.26616/NIOSHSFACE96MN028 Export RIS Citation Information.

:

Brown, Margee ;

Parker, David L.

1996/07/09 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 42-year-old male industrial worker (the victim) died after being crushed by a soft drink palletizer lift. The palletizer fills pallets with cases of...
Fifteen-Year-Old Hispanic Youth Dies After Entering the Hopper of a Bark Blower - Maryland

CITE Title : Fifteen-Year-Old Hispanic Youth Dies After Entering the Hopper of a Bark Blower - Maryland Corporate Authors(s) : National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program Published Date : 2006/02/13 Pages in Document : 11 pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHFACE200408 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program (2006). Fifteen-Year-Old Hispanic Youth Dies After Entering the Hopper of a Bark Blower - Maryland. https://doi.org/10.26616/NIOSHFACE200408 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Fifteen-Year-Old Hispanic Youth Dies After Entering the Hopper of a Bark Blower - Maryland" (2006), https://doi.org/10.26616/NIOSHFACE200408 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Fifteen-Year-Old Hispanic Youth Dies After Entering the Hopper of a Bark Blower - Maryland" , 2006, https://doi.org/10.26616/NIOSHFACE200408 Export RIS Citation Information.

:

National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program

2006/02/13 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On May 18, 2004, a fifteen-year-old Hispanic youth died after entering the hopper of a bark blower and becoming entangled in an auger. The victim was ...
Operator Dies From Crushing Injuries After Being Pinned Between a Track Drill Control Console and Exterior Wall of Courthouse – Tennessee

CITE Title : Operator Dies From Crushing Injuries After Being Pinned Between a Track Drill Control Console and Exterior Wall of Courthouse – Tennessee Corporate Authors(s) : National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program Published Date : 2007/02/12 Pages in Document : 15 pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHFACE200509 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program (2007). Operator Dies From Crushing Injuries After Being Pinned Between a Track Drill Control Console and Exterior Wall of Courthouse – Tennessee. https://doi.org/10.26616/NIOSHFACE200509 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Operator Dies From Crushing Injuries After Being Pinned Between a Track Drill Control Console and Exterior Wall of Courthouse – Tennessee" (2007), https://doi.org/10.26616/NIOSHFACE200509 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Operator Dies From Crushing Injuries After Being Pinned Between a Track Drill Control Console and Exterior Wall of Courthouse – Tennessee" , 2007, https://doi.org/10.26616/NIOSHFACE200509 Export RIS Citation Information.

:

National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program

2007/02/12 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On June 15, 2005, a 58-year-old track drill operator (the victim) was killed when he was pinned and crushed between the control console of a track dri...
Youth Farm Worker Dies After Falling Into Operating Feed Grinder/Mixer - Ohio

CITE Title : Youth Farm Worker Dies After Falling Into Operating Feed Grinder/Mixer - Ohio Corporate Authors(s) : National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program Published Date : 2003/11/20 Pages in Document : 9 pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHFACE200210 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program (2003). Youth Farm Worker Dies After Falling Into Operating Feed Grinder/Mixer - Ohio. https://doi.org/10.26616/NIOSHFACE200210 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Youth Farm Worker Dies After Falling Into Operating Feed Grinder/Mixer - Ohio" (2003), https://doi.org/10.26616/NIOSHFACE200210 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Youth Farm Worker Dies After Falling Into Operating Feed Grinder/Mixer - Ohio" , 2003, https://doi.org/10.26616/NIOSHFACE200210 Export RIS Citation Information.

:

National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program

2003/11/20 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On August 15, 2002, a 14-year-old male farm worker (the victim) died after falling into an operating cattle feed grinder/mixer. The victim was using a...
Machine Operator Crushed Between the Plates of an Injection Mold While Performing Maintenance

CITE Title : Machine Operator Crushed Between the Plates of an Injection Mold While Performing Maintenance Corporate Authors(s) : California Fatality Assessment and Control Evaluation Program (CA/FACE);California. Department of Health Services. Occupational Health Branch; Published Date : 2001/12/13 Pages in Document : 4 pdf pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE01CA007 California Fatality Assessment and Control Evaluation Program (CA/FACE) (2001). Machine Operator Crushed Between the Plates of an Injection Mold While Performing Maintenance. https://doi.org/10.26616/NIOSHSFACE01CA007 California Fatality Assessment and Control Evaluation Program (CA/FACE) "Machine Operator Crushed Between the Plates of an Injection Mold While Performing Maintenance" (2001), https://doi.org/10.26616/NIOSHSFACE01CA007 California Fatality Assessment and Control Evaluation Program (CA/FACE) "Machine Operator Crushed Between the Plates of an Injection Mold While Performing Maintenance" , 2001, https://doi.org/10.26616/NIOSHSFACE01CA007 Export RIS Citation Information.

:

California Fatality Assessment and Control Evaluation Program (CA/FACE) ...

2001/12/13 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 47-year-old machine operator died when crushed between the plates of a plastic injection mold. The victim was performing maintenance at the time of ...
A Punch Press Operator Dies When Struck by a Piece of Metal in the Abdomen

CITE Title : A Punch Press Operator Dies When Struck by a Piece of Metal in the Abdomen Corporate Authors(s) : California Fatality Assessment and Control Evaluation Program (CA/FACE);California. Department of Health Services. Occupational Health Branch; Published Date : 2001/03/19 Pages in Document : 3 pdf pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE00CA008 California Fatality Assessment and Control Evaluation Program (CA/FACE) (2001). A Punch Press Operator Dies When Struck by a Piece of Metal in the Abdomen. https://doi.org/10.26616/NIOSHSFACE00CA008 California Fatality Assessment and Control Evaluation Program (CA/FACE) "A Punch Press Operator Dies When Struck by a Piece of Metal in the Abdomen" (2001), https://doi.org/10.26616/NIOSHSFACE00CA008 California Fatality Assessment and Control Evaluation Program (CA/FACE) "A Punch Press Operator Dies When Struck by a Piece of Metal in the Abdomen" , 2001, https://doi.org/10.26616/NIOSHSFACE00CA008 Export RIS Citation Information.

:

California Fatality Assessment and Control Evaluation Program (CA/FACE) ...

2001/03/19 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 39-year-old male machine operator died when he was struck in the abdomen by a piece of metal that came from the punch press he was operating. The de...
A maintenance repairman dies when struck by a piece of metal in the chest

CITE Title : A maintenance repairman dies when struck by a piece of metal in the chest Corporate Authors(s) : California Fatality Assessment and Control Evaluation Program (CA/FACE);California. Department of Health Services. Occupational Health Branch; Published Date : 2001/03/21 Pages in Document : 3 pdf pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE00CA009 California Fatality Assessment and Control Evaluation Program (CA/FACE) (2001). A maintenance repairman dies when struck by a piece of metal in the chest. https://doi.org/10.26616/NIOSHSFACE00CA009 California Fatality Assessment and Control Evaluation Program (CA/FACE) "A maintenance repairman dies when struck by a piece of metal in the chest" (2001), https://doi.org/10.26616/NIOSHSFACE00CA009 California Fatality Assessment and Control Evaluation Program (CA/FACE) "A maintenance repairman dies when struck by a piece of metal in the chest" , 2001, https://doi.org/10.26616/NIOSHSFACE00CA009 Export RIS Citation Information.

:

California Fatality Assessment and Control Evaluation Program (CA/FACE) ...

2001/03/21 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 44-year-old male maintenance repairman died when a piece of metal struck him in the chest. The victim was working on an ironworker punch press after...
Machine Operator Dies After Becoming Caught in a Shirt Pressing Machine - Massachusetts

CITE Title : Machine Operator Dies After Becoming Caught in a Shirt Pressing Machine - Massachusetts Corporate Authors(s) : Massachusetts Fatality Assessment and Control Evaluation Project (Massachusetts FACE);Massachusetts. Department of Public Health; Published Date : 2003/12/30 Pages in Document : 1-12 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE02MA002 Massachusetts Fatality Assessment and Control Evaluation Project (Massachusetts FACE) (2003). Machine Operator Dies After Becoming Caught in a Shirt Pressing Machine - Massachusetts. https://doi.org/10.26616/NIOSHSFACE02MA002 Massachusetts Fatality Assessment and Control Evaluation Project (Massachusetts FACE) "Machine Operator Dies After Becoming Caught in a Shirt Pressing Machine - Massachusetts" (2003), https://doi.org/10.26616/NIOSHSFACE02MA002 Massachusetts Fatality Assessment and Control Evaluation Project (Massachusetts FACE) "Machine Operator Dies After Becoming Caught in a Shirt Pressing Machine - Massachusetts" , 2003, https://doi.org/10.26616/NIOSHSFACE02MA002 Export RIS Citation Information.

:

Massachusetts Fatality Assessment and Control Evaluation Project (Massachusetts FACE) ...

2003/12/30 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On February 26, 2002, a 44-year-old female machine operator (the victim) was fatally injured when she became caught in the shirt pressing machine she ...
Paper Mill Maintenance Employee Dies After Being Pinned By The Arm Of A Control Mechanism In A Roll Wrap Machine

CITE Title : Paper Mill Maintenance Employee Dies After Being Pinned By The Arm Of A Control Mechanism In A Roll Wrap Machine Corporate Authors(s) : Minnesota Fatality Assessment & Control Evaluation Program (MN FACE);Minnesota. Department of Health; Published Date : 2004/09/23 Pages in Document : 1-6 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE03MN039 Minnesota Fatality Assessment & Control Evaluation Program (MN FACE) (2004). Paper Mill Maintenance Employee Dies After Being Pinned By The Arm Of A Control Mechanism In A Roll Wrap Machine. https://doi.org/10.26616/NIOSHSFACE03MN039 Minnesota Fatality Assessment & Control Evaluation Program (MN FACE) "Paper Mill Maintenance Employee Dies After Being Pinned By The Arm Of A Control Mechanism In A Roll Wrap Machine" (2004), https://doi.org/10.26616/NIOSHSFACE03MN039 Minnesota Fatality Assessment & Control Evaluation Program (MN FACE) "Paper Mill Maintenance Employee Dies After Being Pinned By The Arm Of A Control Mechanism In A Roll Wrap Machine" , 2004, https://doi.org/10.26616/NIOSHSFACE03MN039 Export RIS Citation Information.

:

Minnesota Fatality Assessment & Control Evaluation Program (MN FACE) ...

2004/09/23 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 47-year-old male employee died after he was injured in a roll wrapper machine at a paper mill. The operator of the wrapper had contacted maintenance...
Sawmill Foreman Dies of Injuries After Legs were Severed by a Saw Blade

CITE Title : Sawmill Foreman Dies of Injuries After Legs were Severed by a Saw Blade Personal Author(s) : Boyle, Debora;Kerr, Steven;Parker, David L.; Corporate Authors(s) : Minnesota Fatality Assessment & Control Evaluation Program (MN FACE);Minnesota. Department of Health; Published Date : 1995/06/09 Pages in Document : 1-6 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE95MN005 Boyle, Debora et al. (1995). Sawmill Foreman Dies of Injuries After Legs were Severed by a Saw Blade. https://doi.org/10.26616/NIOSHSFACE95MN005 Boyle, Debora and Kerr, Steven and Parker, David L. "Sawmill Foreman Dies of Injuries After Legs were Severed by a Saw Blade" (1995), https://doi.org/10.26616/NIOSHSFACE95MN005 Boyle, Debora et al. "Sawmill Foreman Dies of Injuries After Legs were Severed by a Saw Blade" , 1995, https://doi.org/10.26616/NIOSHSFACE95MN005 Export RIS Citation Information.

:

Boyle, Debora ;

Kerr, Steven

1995/06/09 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 34-year-old male sawmill foreman (victim) died of injuries sustained after his legs were severed by a saw blade. The incident occurred at the locati...
Machine Operator Dies After Being Crushed by 9,700-Pound Coil Cart-Pennsylvania

CITE Title : Machine Operator Dies After Being Crushed by 9,700-Pound Coil Cart-Pennsylvania Corporate Authors(s) : National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program Published Date : 1998/10/29 Pages in Document : 8 pages Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHFACE9814 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program (1998). Machine Operator Dies After Being Crushed by 9,700-Pound Coil Cart-Pennsylvania. https://doi.org/10.26616/NIOSHFACE9814 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Machine Operator Dies After Being Crushed by 9,700-Pound Coil Cart-Pennsylvania" (1998), https://doi.org/10.26616/NIOSHFACE9814 National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program "Machine Operator Dies After Being Crushed by 9,700-Pound Coil Cart-Pennsylvania" , 1998, https://doi.org/10.26616/NIOSHFACE9814 Export RIS Citation Information.

:

National Institute for Occupational Safety and Health. Fatality Assessment and Control Evaluation (FACE) Program

1998/10/29 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 24-year-old male machine operator (the victim) died after a coil cart he was repairing fell on top of him. The victim was working with another worke...
Worker Fatally Injured by Steel Blade While Cleaning a Dough Machine

CITE Title : Worker Fatally Injured by Steel Blade While Cleaning a Dough Machine Corporate Authors(s) : New York State Fatality Assessment & Control Evaluation Program (NY FACE);New York (State). Department of Health;New York (State). Bureau of Occupational Health; Published Date : 2003/07/08 Pages in Document : 1-10 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE02NY096 New York State Fatality Assessment & Control Evaluation Program (NY FACE) (2003). Worker Fatally Injured by Steel Blade While Cleaning a Dough Machine. https://doi.org/10.26616/NIOSHSFACE02NY096 New York State Fatality Assessment & Control Evaluation Program (NY FACE) "Worker Fatally Injured by Steel Blade While Cleaning a Dough Machine" (2003), https://doi.org/10.26616/NIOSHSFACE02NY096 New York State Fatality Assessment & Control Evaluation Program (NY FACE) "Worker Fatally Injured by Steel Blade While Cleaning a Dough Machine" , 2003, https://doi.org/10.26616/NIOSHSFACE02NY096 Export RIS Citation Information.

:

New York State Fatality Assessment & Control Evaluation Program (NY FACE) ...

2003/07/08 | Fatality Assessment and Control Evaluation Reports (FACE)

:

On December 21, 2002, a 54 year-old Taiwanese male food production worker, who was employed by a pizza dough manufacturing facility, sustained fatal i...
Industrial Worker Dies After Being Struck By A Steel Bar While Operating A Computerized Turning Center

CITE Title : Industrial Worker Dies After Being Struck By A Steel Bar While Operating A Computerized Turning Center Personal Author(s) : Brown, Margee;Parker, David L.; Corporate Authors(s) : Minnesota Fatality Assessment & Control Evaluation Program (MN FACE);Minnesota. Department of Health; Published Date : 1996/09/27 Pages in Document : 1-4 Series : Fatality Assessment and Control Evaluation Reports (FACE) DOI : https://doi.org/10.26616/NIOSHSFACE96MN050 Brown, Margee and Parker, David L. (1996). Industrial Worker Dies After Being Struck By A Steel Bar While Operating A Computerized Turning Center. https://doi.org/10.26616/NIOSHSFACE96MN050 Brown, Margee and Parker, David L. "Industrial Worker Dies After Being Struck By A Steel Bar While Operating A Computerized Turning Center" (1996), https://doi.org/10.26616/NIOSHSFACE96MN050 Brown, Margee and Parker, David L. "Industrial Worker Dies After Being Struck By A Steel Bar While Operating A Computerized Turning Center" , 1996, https://doi.org/10.26616/NIOSHSFACE96MN050 Export RIS Citation Information.

:

Brown, Margee ;

Parker, David L.

1996/09/27 | Fatality Assessment and Control Evaluation Reports (FACE)

:

A 30-year-old industrial worker died of injuries he sustained while he operated a computerized turning center (1) that produced metal components accor...

21 - 40 / 192

Previous 1 2 3 4 ... 10