The Community Guide

- gsearch

Search Results

Narrow Results:

1995 2
1989 1
1987 1
1985 1

Report of Investigations 5

Occupational Health 5
Safety 5

United States. Bureau of Mines 5

Text 5

Report 5

1 - 5 of 5 Results

Refine Results

Refine Results:

Use of an in-seam tester to determine effects of bit type on primary dust generation

CITE Title : Use of an in-seam tester to determine effects of bit type on primary dust generation Personal Author(s) : Sundae, Laxman S. Corporate Authors(s) : United States. Bureau of Mines Published Date : 1989 Pages in Document : 13 numbered pages Series : Mining Publications URL : https://stacks.cdc.gov/view/cdc/10759 Sundae, Laxman S. (1989). Use of an in-seam tester to determine effects of bit type on primary dust generation. Sundae, Laxman S. "Use of an in-seam tester to determine effects of bit type on primary dust generation" (1989) Sundae, Laxman S. "Use of an in-seam tester to determine effects of bit type on primary dust generation" , 1989 Export RIS Citation Information.

:

Sundae, Laxman S.

1989 | Mining Publications

:

"A U.S. Bureau of Mines designed and fabricated in-seam tester, retrofitted with a dust shroud, was used to establish a respirable dust index (rdi) an...
In situ comparison of radial and point-attack bits

CITE Title : In situ comparison of radial and point-attack bits Personal Author(s) : Myren, Theodore A.;Sundae, Laxman S.; Corporate Authors(s) : United States. Bureau of Mines Published Date : 1987 Pages in Document : 15 numbered pages Series : Mining Publications URL : https://stacks.cdc.gov/view/cdc/10537 Myren, Theodore A. and Sundae, Laxman S. (1987). In situ comparison of radial and point-attack bits. Myren, Theodore A. and Sundae, Laxman S. "In situ comparison of radial and point-attack bits" (1987) Myren, Theodore A. and Sundae, Laxman S. "In situ comparison of radial and point-attack bits" , 1987 Export RIS Citation Information.

:

Myren, Theodore A. ;

Sundae, Laxman S.

1987 | Mining Publications

:

"The Bureau of Mines conducted a series of tests to compare the cutting forces required by radial and point-attack bits when making similar cuts. Thre...
The Reduction of airborne dust generated by roof bolt drill bits through the use of water

CITE Title : The Reduction of airborne dust generated by roof bolt drill bits through the use of water Personal Author(s) : Sundae, Laxman S. Corporate Authors(s) : United States. Bureau of Mines Published Date : 1995 Pages in Document : iv, 25 numbered pages Series : Mining Publications URL : https://stacks.cdc.gov/view/cdc/10261 Sundae, Laxman S. (1995). The Reduction of airborne dust generated by roof bolt drill bits through the use of water. Sundae, Laxman S. "The Reduction of airborne dust generated by roof bolt drill bits through the use of water" (1995) Sundae, Laxman S. "The Reduction of airborne dust generated by roof bolt drill bits through the use of water" , 1995 Export RIS Citation Information.

:

Sundae, Laxman S.

1995 | Mining Publications

:

"The study, shows that the large volumes of water conventionally used in wet drilling are not necessary, and the performance benefits from wet drillin...
Measurement of coal-cutting forces underground with the in-seam tester

CITE Title : Measurement of coal-cutting forces underground with the in-seam tester Personal Author(s) : Sundae, Laxman S. Corporate Authors(s) : United States. Bureau of Mines Published Date : 1985 Pages in Document : 16 numbered pages Series : Mining Publications URL : https://stacks.cdc.gov/view/cdc/10592 Sundae, Laxman S. (1985). Measurement of coal-cutting forces underground with the in-seam tester. Sundae, Laxman S. "Measurement of coal-cutting forces underground with the in-seam tester" (1985) Sundae, Laxman S. "Measurement of coal-cutting forces underground with the in-seam tester" , 1985 Export RIS Citation Information.

:

Sundae, Laxman S.

1985 | Mining Publications

:

"The Bureau of Mines designed, fabricated, and is using an in-seam tester for in situ determination of coal cutting forces. This report describes the ...
Investigation of optimum thrust, cutting speed, and water pressure for tungsten carbide and polycrystalline diamond compact roof- bolt drill bits

CITE Title : Investigation of optimum thrust, cutting speed, and water pressure for tungsten carbide and polycrystalline diamond compact roof- bolt drill bits Personal Author(s) : Howie, Wayne L.;Smelser, T. W.;Sundae, Laxman S.; Corporate Authors(s) : United States. Bureau of Mines Published Date : 1995 Pages in Document : iv, 20 numbered pages Series : Mining Publications URL : https://stacks.cdc.gov/view/cdc/10176 Howie, Wayne L. et al. (1995). Investigation of optimum thrust, cutting speed, and water pressure for tungsten carbide and polycrystalline diamond compact roof- bolt drill bits. Howie, Wayne L. and Smelser, T. W. and Sundae, Laxman S. "Investigation of optimum thrust, cutting speed, and water pressure for tungsten carbide and polycrystalline diamond compact roof- bolt drill bits" (1995) Howie, Wayne L. et al. "Investigation of optimum thrust, cutting speed, and water pressure for tungsten carbide and polycrystalline diamond compact roof- bolt drill bits" , 1995 Export RIS Citation Information.

:

Howie, Wayne L. ;

Smelser, T. W.

1995 | Mining Publications

:

"Laboratory tests were conducted at the U.S. Bureau of Mines to determine the effects of roof-bolt drilling parameters on penetration rate in sandston...